Router Setup And Installation - D-Link SECURICAM Network DCS-950 User Manual

DCS-950 User's Manual

Router Setup and Installation

The following steps generally apply to any router that you have on your network. The
D-Link DI-624 is used as an example to clarify the configuration process. Your WAN Ip
Address information will be listed on following window.
Note: Because a dynamic WAN IP address can change from time to time depending on
your ISP, you may want to obtain a Static IP address from your ISP. A Static IP address
is a fixed IP address that will not change over time and will be more convenient for you
to use to access your camera from a remote location. You can use DDNS to obtain an
IP address, please refer to page 32 for more information.
D-Link Systems, Inc.
Installing the DCS-950 Behind a Router
Determine Your Router's WAN IP Address
46