Table of Contents
Advertisement
Quick Links
This evaluation module (EVM) is a complete evaluation system for the bq35100. This EVM includes one
bq35100 circuit module, an external current sense resistor. A separate orderable EV2300 or EV2400 PC
interface board for gas gauge, along with a PC USB cable, and Microsoft
is needed when using this EVM. The circuit module includes one bq35100 integrated circuit and all other
onboard components necessary to monitor and predict capacity for a system-side or removable battery
pack fuel-gauge solution. With the EV2300 or EV2400 users can:
•
Read the bq35100 data registers
•
Program the chipset for different configurations
•
Log cycling data for further evaluation
•
Evaluate the overall functionality under different charge and discharge conditions
......................................................................................................................
1
1.1
1.2
1.3
2
2.1
2.2
2.3
2.4
2.5
2.6
.....................................................................................................................
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
4
4.1
4.2
4.3
5
1
2
3
4
5
Chemistry Screen
6
Programming Screen
Microsoft, Windows are registered trademarks of Microsoft Corporation.
SLUUBH7 - July 2016
Submit Documentation Feedback
bq35100EVM-795 Evaluation Module
..........................................................................................................
...............................................................................................
...........................................................................................
..............................................................................................
................................................................................................
...................................................................................................
...........................................................................................
...............................................................................................
...........................................................................................................
.................................................................................................
.............................................................................................
..................................................................................
............................................................................................
.......................................................................................................
....................................................................................................
..........................................................................................................
............................................................................................................
........................................................................................................
...........................................................................................................
..........................................................................................................
......................................................................................................
Copyright © 2016, Texas Instruments Incorporated
Contents
..............................................
..................................................................
.....................................................................
........................................................................
...................................................
......................................................................
......................................................
bq35100EVM-795 Evaluation Module
User's Guide
SLUUBH7 - July 2016
Windows
based PC software
®
®
3
3
3
3
4
4
4
4
4
5
6
7
7
8
9
11
12
13
14
15
15
19
20
21
5
7
8
9
11
12
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Texas Instruments bq35100EVM-795
Summary of Contents for Texas Instruments bq35100EVM-795
-
Page 1: Table Of Contents
......................Registers Screen ......................Data Memory Screen ......................Calibration Screen ......................Chemistry Screen ...................... Programming Screen Microsoft, Windows are registered trademarks of Microsoft Corporation. SLUUBH7 – July 2016 bq35100EVM-795 Evaluation Module Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... - Page 2 List of Tables ......................Ordering Information ..................Performance Specification Summary ....................... EVM Pin Descriptions ..............Circuit Module to EV2300 or EV2400 Connections ......................Bill of Materials bq35100EVM-795 Evaluation Module SLUUBH7 – July 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
-
Page 3: Features
This section summarizes the performance specifications of the bq35100 circuit module. Table 2. Performance Specification Summary Specification Units Input Voltage BAT+ to BAT - Charge and discharge current 0.75 1.25 SLUUBH7 – July 2016 bq35100EVM-795 Evaluation Module Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 4: Bq35100Evm Quick Start Guide
Be sure to log in as Administrator before downloading the files. The driver is not signed, so the administrator must allow installation of unsigned drivers in the operating system. If using Windows 7, install the software with administrator privileges. bq35100EVM-795 Evaluation Module SLUUBH7 – July 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 5: Evm Connections
ALERT/ (J5) Place jumpers on PULL-UP ALERT/ to apply a pull-up resistor to open drain outputs ALERT/ output. The output can be monitored on J5. SLUUBH7 – July 2016 bq35100EVM-795 Evaluation Module Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 6: Pc Interface Connection
Table 4. Circuit Module to EV2300 or EV2400 Connections bq35100EVM EV2300 EV2400 PORT2 - SDA PORT2 - SCL PORT2 - VSS The bq35100EVM-795 is now set up for operation. bq35100EVM-795 Evaluation Module SLUUBH7 – July 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 7: Operation
1 (high state). Data begins to appear once the Refresh (single-time scan) button is selected, or it scans continuously if the Scan button is selected. Figure 2. Registers Screen SLUUBH7 – July 2016 bq35100EVM-795 Evaluation Module Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 8: Setting Programmable Bq35100 Options
J3 headers to select the mode of operation. Refer to the EVM Connections section. For packs where the stack voltage is less than 5 V: bq35100EVM-795 Evaluation Module SLUUBH7 – July 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 9: Calibration
The bq35100EVM must be calibrated to ensure accurate value reporting. This is done by going to the Calibration window in bqStudio (see Figure Figure 4. Calibration Screen SLUUBH7 – July 2016 bq35100EVM-795 Evaluation Module Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... - Page 10 Enter '–1000' in the Applied Current field and select the Calibrate Current box. • Press the Calibrate Gas Gauge button to calibrate. • Deselect the Calibrate Current box after current calibration has completed. bq35100EVM-795 Evaluation Module SLUUBH7 – July 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
-
Page 11: Chemistry Screen
Select the Chemistry ID that matches your cell from the table (see Figure • Press the Update Chemistry in the Data Flash button to update the chemistry in the device. SLUUBH7 – July 2016 bq35100EVM-795 Evaluation Module Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 12: Programming Screen
Search for the .srec file using the Browse button. • Press the Program button and wait for the download to complete. • Press the Execute FW button after the programming is completed. bq35100EVM-795 Evaluation Module SLUUBH7 – July 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 13: Advanced Comm Smb Screen
Sending a MAC GAUGE_START to start gauging via ManufacturerAccess(). • Send GAUGE_START() (0x11) to ManufacturerAccess(). – SMBus Write Word. Command = 0x00. Data = 11 00 SLUUBH7 – July 2016 bq35100EVM-795 Evaluation Module Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 14: Golden Image Screen
Select the files types to export. • Press the Create Image Files button to export the memory and create the files. Figure 8. Golden Image Screen bq35100EVM-795 Evaluation Module SLUUBH7 – July 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 15: Circuit Module Physical Layout, Bill Of Materials, And Schematic
This section shows the printed circuit board (PCB) layers, and assembly drawing for the bq35100 module (Figure 9 through Figure 12). Figure 9. Top Silk Screen SLUUBH7 – July 2016 bq35100EVM-795 Evaluation Module Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 16: Top Assembly
Circuit Module Physical Layout, Bill of Materials, and Schematic www.ti.com Figure 10. Top Assembly bq35100EVM-795 Evaluation Module SLUUBH7 – July 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 17: Top Layer
Circuit Module Physical Layout, Bill of Materials, and Schematic www.ti.com Figure 11. Top Layer SLUUBH7 – July 2016 bq35100EVM-795 Evaluation Module Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 18: Bottom Layer
Circuit Module Physical Layout, Bill of Materials, and Schematic www.ti.com Figure 12. Bottom Layer bq35100EVM-795 Evaluation Module SLUUBH7 – July 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 19: Bill Of Materials
ESD in 0402 Package with 10 pF Capacitance and 6 V Breakdown, 1 DPY0002A TPD1E10B06DPYR Texas Instruments Channel, -40 to +125 degC, 2-pin X2SON (DPY), Green (RoHS & no Sb/Br) SLUUBH7 – July 2016 bq35100EVM-795 Evaluation Module Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 20: Schematic
Voltage: 0V to 20V Current: 1 to 1A 1µF REGIN 0.1µF 0.1µF Net-Tie BQ35100PWR 1.0k 0.1µF 1.0M Copyright © 2016, Texas Instruments Incorporated Figure 13. bq35100EVM Schematic bq35100EVM-795 Evaluation Module SLUUBH7 – July 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated... -
Page 21: Related Documentation From Texas Instruments
Related Documentation from Texas Instruments Please contact the Texas Instruments Literature Response Center at (800) 477-8924 or the Product Information Center (PIC) at (972) 644-5580 for additional support. When ordering, identify this document by its title and literature number. Updated documents also can be obtained through the TI Web site at www.ti.com. - Page 22 STANDARD TERMS AND CONDITIONS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, or documentation (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms and conditions set forth herein. Acceptance of the EVM is expressly subject to the following terms and conditions.
- Page 23 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 24 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿６丁目２４番１号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧くださ い。http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page SPACER EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS.
- Page 25 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2015, Texas Instruments Incorporated...
-
Page 26: Important Notice
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. - Page 27 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments BQ35100EVM-795...
Need help?
Do you have a question about the bq35100EVM-795 and is the answer not in the manual?
Questions and answers