Panasonic AW-HE120K Operating Instructions Manual page 45

Troubleshooting
 Video 
Symptom
No pictures are
displayed or the
pictures are disturbed
The picture is flipped
vertically
Multiple color bands
(color bars) are
displayed
The menu screen is
displayed
It is difficult to view
the menu screens
No auto focusing
The subject is not
brought into focus
during zooming when
the manual setting is
used for the focus
(continued)
Cause and remedial action
  Has the unit been connected properly to the other connected
devices?
  If the system is configured in such a way that the picture is also
switched when the unit to be operated is selected, has the correct
unit been selected?
  Has the video signal setting been selected correctly?
  Are external sync signals that are supported by the video signal
format which has been set being input?
  Has the stand-alone (Desktop) installation setting been selected
correctly?
  Switch to the camera picture.
  Exit the camera menu.
  Depending on the HDMI monitor you are using, you may
experience one or more of the symptoms described below.
These symptoms are especially noticeable when any of the SD
formats is used: This is normal and not indicative of any trouble.
• The resolution of the characters in the camera menu displays
changes as the background image changes.
• Depending on the edge enhancement setting established for the
monitor, white lines appear in front of the black shadows of the
camera menus.
• Depending on the edge enhancement setting established for the
monitor, the background colors may be superimposed onto the white
parts of the camera menus.
  Is the focus set to manual?
 Auto focusing is initiated as soon as the focus is set to auto.
  In some situations, it may be hard to focus at the auto setting.
 In cases like this, select the manual setting, and focus manually.
  Was the focus adjusted at the Tele end?
 First adjust the focus at the Tele end where the focusing accuracy is
higher, and then proceed with the zooming.
  Under some operating conditions, it may be hard to bring
subjects into focus.
 In such cases, use the focus at the auto setting.
Reference
pages
P.18 to 21
<Operations and
Settings>
P.9
<Operations and
Settings>
P.46, P.72
P.36
<Operations and
Settings>
P.48, P.73
<Operations and
Settings>
P.13
<Operations and
Settings>
P.29 to 36
–––
<Operations and
Settings>
P.13
<Operations and
Settings>
P.15
–––
<Operations and
Settings>
P.13
45