Setting The Remote Control Ids - Panasonic AW-HE120K Operating Instructions Manual

Setting the remote control IDs

The wireless remote control (optional accessory) is capable
of operating up to four units.
IDs are used to set which units are selected when the
[CAM1], [CAM2], [CAM3] and [CAM4] buttons on the
wireless remote control have been pressed.
  When operating a multiple number of these units using
wireless remote controls, set a different remote control ID
for each control.
  When using one unit, set the remote control ID to "CAM1"
unless the setting needs to be changed.
Setting procedure
Operate the IR ID switch on the units rear panel, and select
"CAM1", "CAM2", "CAM3" or "CAM4" as the remote control
ID. (See page 36)
The IR ID switch settings "CAM1" to "CAM4" correspond to
the [CAM1] to [CAM4] buttons on the wireless remote control.
(The factory setting is "CAM1".)
[CAM1] to [CAM4] buttons
IR ID switches
39