Table of Contents
Advertisement
Controller supported
AW-RP655
AW-RP555
AW-RP50
It may be necessary to upgrade the version of the
controller in order to support the unit.
Consult with your dealer.
Accessories
Check that the following accessories are present and accounted for.
After removing the product from its container, dispose of the power cable cap and packing materials
in an appropriate manner.
Operating Instructions
<Basics>
<Operations and Settings>
(CD-ROM) .............................. 1
Drop-prevention wire ........... 1
Drop-prevention wire
mounting screw ................... 1
(already attached to the unit)
( page 9, page 15)
Mount bracket for installation
surface
(Hanging / Desktop) ............. 1
( page 9, page 15)
Bracket mounting screws
(bind-head) M4 10 mm ..... 4
( page 9, page 15)
Notes
When connecting the AW-RP655
The camera menus that are operated using the
LCD panel on the AW-RP655 cannot be used.
Use the camera menus displayed on the
monitor which has been connected to the unit.
When connecting the AW-RP555
The AW-RP555 periodically transmits the
POWER-ON command to the pan-tilt head.
This means when the unit has been selected from
the AW-RP555, its power will be turned on again
after several seconds even if the unit has been
set to the standby mode by the web browser,
IP-connected controller or wireless remote control
(optional accessory).
Main unit mounting screw
(with flat washer, spring
washer) M3 6 mm ............ 1
( page 10, page 15)
Cable cover .......................... 1
( page 11, page 16)
Power cable (2 m [6.6 ft]) ..... 2
AC adaptor ........................... 1
31
Hide quick links:
Advertisement
Table of Contents
