Concerning The Wireless Remote Control (Optional Accessory) - Panasonic AW-HE120K Operating Instructions Manual

Concerning the wireless remote control (optional accessory)

This unit can be operated by remote control using a
wireless remote control (model number: AW-RM50G)
purchased separately.
Check out the following points before using the wireless
remote control.
Consult your dealer concerning the purchase of a
wireless remote control.
  Operate the wireless remote control from positions
less than 10 meters (32.8 ft) away from the unit.
  The wireless remote control may not work when it is
pointed from certain angles at the unit.
From a place where the wireless remote control signal
light-sensing area (hereafter, "light-sensing area") can be
seen, point the signal transmission window of the wireless
remote control at the light-sensing area, and operate the
buttons.
It may prove to be more difficult to operate the unit when
the remote control is operated from behind the unit.
  If the unit is installed near fluorescent lights, plasma
monitors or other such products or if the unit is
exposed to sunlight, the effects of the light may make
it impossible for the unit to be operated using the
wireless remote control.
Be sure to follow the steps below for installation and use.
• Take steps to ensure that the light-sensing area will not
be exposed to the light from fluorescent lights, plasma
monitors or other such products or from the sun.
• Install the unit away from fluorescent lights, plasma
monitors and other such products.
  For about 10 minutes even after the batteries have
been removed from the wireless remote control,
the selection of the operation to be performed (the
[CAM1], [CAM2], [CAM3] or [CAM4] button which was
pressed last) will remain stored in the memory.
When a longer period of time elapses, however, the
selection is reset to the status established when the
[CAM1] button was pressed.
34