Motorola HMEZ2000 - Homesight Wireless Home Security Monitoring Quick Start Manual page 5

Easy start kit
Hide thumbs Also See for HMEZ2000 - Homesight Wireless Home Security Monitoring:
Table of Contents

Advertisement

3
Position the camera to view the desired area and plug in the power supply. Please keep in mind that the field of
view is 80 degrees and the motion sensor distance works up to 12–14 feet (3.5–4 m).
4
Make adjustments to the camera viewing angle by tilting and panning the camera head with your hand.
Table Mount Your Wireless Camera
The camera can be placed on any horizontal surface.
1
Locate the camera on a horizontal surface.
2
Plug the power supply into camera and then to a wall outlet.
3
Make adjustments to the camera viewing angle by tilting and panning the camera head with your hand.
Installing Your Door/Window Sensor
Installing your sensor is a simple process.
1
Locate the antenna and screw it into the top-right corner of the sensor, just above the air vents, until it
is secure.
Sharp objects should be stored out of reach of children to prevent injury.
2
Insert the batteries. On the bottom of the sensor, slide open the door and
insert two AAA alkaline batteries. The back of the door of the sensor indicates
the polarity (+ and -) of the batteries. Close the door after inserting batteries.
The sensor does not support rechargeable NiCad or NiMH batteries.
However, the sensor does employ built-in power saving functionality.
3
Register your sensor with your Wireless System Controller using a process called Discovery. Refer to your
Wireless System Controller documentation for instructions on how to discover your Wireless Door/Window
Sensor.
Discovery
button
Detach base
5

Hide quick links:

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Table of Contents