Maxview C3014/B Installation And User Manual

C3014/B
Installation and user guide
Safety Instructions
> Always follow manufacturer's operating and safety instructions when using tools and/or equipment
> Before starting installation check structure is sound and check for hidden electrical wiring or plumbing
> To avoid injury always route cables and wiring carefully
> Always remove your aerial and mast before travelling
> Handle reflector plate with care as it may have sharp edges
> Maxview shall not be liable for any damages or injury resulting from improper installation of this aerial kit
> If using Sikaflex-512 - Do not travel until adhesive has cured, consult adhesive manufacturer
> If in doubt consult a qualified professional aerial installer
Guidelines for the best reception
> Choose the site position where the aerial can be mounted as high as possible with a clear line of sight pointing in
the direction of the transmitter with no obstructions e.g trees, buildings blocking view
> TV reception may improve with height and the less obstructions between the aerial and the transmitter the better.
> To route the cable from the aerial to the TV inside the vehicle, the use of a Maxview weatherproof socket is
recommended*
> For the best interference free reception, do not run in parallel with electrical or other power cables
> The quality of picture may be improved by fitting a Maxview signal booster if you are in a weak signal area*
*See back page for details
UK contact:
Helpline: +44 (0)1553 811000
Email: support@maxview.co.uk
Web: www.maxview.co.uk
Maxview reserve the right to change specifications without prior notice
9111061 Iss 2
Mobile TV Aerial Kit - 14 Element
Rate and Like us on Facebook:
Search: 'Maxviewlimited' today.