iDataLink maestro RR Install Manual
  1. Manuals
  2. Brands
  3. iDataLink Manuals
  4. Automobile Electronics
  5. maestro Rr
  6. Install manual
iDataLink maestro RR Install Manual

iDataLink maestro RR Install Manual

Chrysler pacifica 2017, 2018-2021 chrysler voyager 2020-2021
Hide thumbs Also See for maestro RR:

Advertisement

Table of Contents

SELECT VEHICLE
PRINT PAGES NEEDED
HOW TO USE THIS INSTALL GUIDE
1
Open the Bookmarks menu and find your vehicle OR scroll
down until you find the install guide for your vehicle.
2
Print only the pages for your vehicle using the advanced
options in the Print menu.
3
Install your Maestro RR according to the guide for your vehicle.
Pressing the printer icon or "quick printing" this document will print
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in
are the properties of their respective owners.
WARNING
all of the guides in this compilation.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the maestro RR and is the answer not in the manual?

Questions and answers

Related Manuals for iDataLink maestro RR

Summary of Contents for iDataLink maestro RR

  • Page 1 Print only the pages for your vehicle using the advanced options in the Print menu. Install your Maestro RR according to the guide for your vehicle. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation.

  • Page 2: Install Guide

    PRODUCTS REQUIRED PROGRAMMED FIRMWARE: CH3-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro PAC1 Dash Kit NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

  • Page 3: Need Help

    Chrysler PaCifiCa 2017 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.

  • Page 4: Installation Instructions

    Replace the media hub with the one supplied in the PAC1 4” 8.4” kit. Reassemble in reverse order. Fig. 1.1a Fig. 1.1b Fig. 1.2 Fig. 1.5a Fig. 1.5b Fig. 1.3a Fig. 1.3b Fig. 1.6 Fig. 1.7 Automotive Data Solutions Inc. © 2023 CH3-RR-DS-(HRR-PAC1)-EN maestro.idatalink.com...
  • Page 5 12. Install the (11) supplied black clips on to the back of the PAC1 bezel. (Fig. 1.12) 13. Snap the factory vents into place and secure them with the (8) screws removed earlier. (Fig. 1.13) Fig. 1.12 Fig. 1.8a Fig. 1.8b Fig. 1.13 Automotive Data Solutions Inc. © 2023 CH3-RR-DS-(HRR-PAC1)-EN maestro.idatalink.com...
  • Page 6 Plug the short USB adapter into the radio’s USB input. Insert the audio cable into the iDatalink 3.5mm audio jack of the aftermarket radio. If there is no iDatalink audio input, plug this cable into the radio’s AUX port. Note: On Pioneer radios, ensure there is nothing plugged into the W/R port.

  • Page 7: Wiring Diagram

    When using an Alpine radio in vehicles without OEM amplifier, with OEM parking sensors, cross-traffic alerts, or lane departure alerts BLACK STEP 3 CENTER DASH BELOW RADIO MAESTRO RR MODULE PAC1 MEDIA HUB HHR-PAC1 T-HARNESS N.C. AMP TURNON AMP TURNON N.C.

  • Page 8: Radio Wire Reference Chart

    Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 CH3-RR-DS-(HRR-PAC1)-EN maestro.idatalink.com...

  • Page 9: Module Diagnostics

    Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 CH3-RR-DS-(HRR-PAC1)-EN maestro.idatalink.com...

  • Page 10: Troubleshooting Table

    Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the fl ash.
  • Page 11 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: CH3-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro PAC1 Dash Kit NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 12 Chrysler PaCifiCa 2018-2021 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 13 Replace the media hub with the one supplied in the PAC1 8.4” kit. Reassemble in reverse order. Fig. 1.1a Fig. 1.1b Fig. 1.2 Fig. 1.5a Fig. 1.5b Fig. 1.3a Fig. 1.3b Fig. 1.6 Fig. 1.7 Automotive Data Solutions Inc. © 2023 CH3-RR-DS-(HRR-PAC1)-EN maestro.idatalink.com...
  • Page 14 12. Install the (11) supplied black clips on to the back of the PAC1 bezel. (Fig. 1.12) 13. Snap the factory vents into place and secure them with the (8) screws removed earlier. (Fig. 1.13) Fig. 1.12 Fig. 1.8a Fig. 1.8b Fig. 1.13 Automotive Data Solutions Inc. © 2023 CH3-RR-DS-(HRR-PAC1)-EN maestro.idatalink.com...
  • Page 15 W/R port. • Locate the aftermarket radio’s main harness. 6. Connect all the harnesses to the Maestro RR module. • Cut and remove the black 20 pin connector from the PAC1 T-harness and connect the wires, shown in the wiring...
  • Page 16 CAN JUNCTION CONNECTOR (GREEN) BLACK UNPLUG N.C. BLACK MAESTRO RR MODULE INSERT THE MALE WHITE CONNECTOR FROM B HARNESS INTO THE JUNCTION BLOCK. CONNECT THE FACTORY 2 PIN CONNECTOR INTO THE BEHIND GLOVE BOX B HARNESS FEMALE WHITE 2-PIN CONNECTOR.
  • Page 17 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 CH3-RR-DS-(HRR-PAC1)-EN maestro.idatalink.com...
  • Page 18 Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 CH3-RR-DS-(HRR-PAC1)-EN maestro.idatalink.com...
  • Page 19 Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the fl ash.
  • Page 20 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: CH3-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro PAC1 Dash Kit NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 21 Chrysler Voyager 2020-2021 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 22 Replace the media hub with the one supplied in the PAC1 8.4” kit. Reassemble in reverse order. Fig. 1.1a Fig. 1.1b Fig. 1.2 Fig. 1.5a Fig. 1.5b Fig. 1.3a Fig. 1.3b Fig. 1.6 Fig. 1.7 Automotive Data Solutions Inc. © 2023 CH3-RR-DS-(HRR-PAC1)-EN maestro.idatalink.com...
  • Page 23 12. Install the (11) supplied black clips on to the back of the PAC1 bezel. (Fig. 1.12) 13. Snap the factory vents into place and secure them with the (8) screws removed earlier. (Fig. 1.13) Fig. 1.12 Fig. 1.8a Fig. 1.8b Fig. 1.13 Automotive Data Solutions Inc. © 2023 CH3-RR-DS-(HRR-PAC1)-EN maestro.idatalink.com...
  • Page 24 W/R port. • Locate the aftermarket radio’s main harness. 6. Connect all the harnesses to the Maestro RR module. • Cut and remove the black 20 pin connector from the PAC1 T-harness and connect the wires, shown in the wiring...
  • Page 25 CAN JUNCTION CONNECTOR (GREEN) BLACK UNPLUG N.C. BLACK MAESTRO RR MODULE INSERT THE MALE WHITE CONNECTOR FROM B HARNESS INTO THE JUNCTION BLOCK. CONNECT THE FACTORY 2 PIN CONNECTOR INTO THE BEHIND GLOVE BOX B HARNESS FEMALE WHITE 2-PIN CONNECTOR.
  • Page 26 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 CH3-RR-DS-(HRR-PAC1)-EN maestro.idatalink.com...
  • Page 27 Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 CH3-RR-DS-(HRR-PAC1)-EN maestro.idatalink.com...
  • Page 28 Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the fl ash.

Table of Contents