Validation Slip Specification; Printing Of The Employee Arrival And Departure Times - Sharp ER-A440 Instruction Manual

Validation slip specification

Make validation slips according to the following specification. The use of any slips other than specified causes
the printer to malfunction.
• Type of paper: plain paper
• Paper thickness: 0.07 to 0.14 mm
• Paper width: 130 mm or more
• Paper height: 70 mm or more
• Print position
22mm
4

Printing of the employee arrival and departure times

The register allows the cashier to print the employee arrival and departure times, etc. using the validation
printing function.
1.
Turn the mode switch to the "OP X/Z" position.
2.
Put a card into the paper chute and perform the following key operation.
• Arrival time
Numeric key 1
• Departure time
Numeric key 2
3.
Sample printout
Arrival time
87.0mm
130 mm
Ú
Ú
Cashier code
20mm
Departure time
70mm
115