Exibel BTX500 ANC Manual

Wireless earphones
Art.no 39-2808-1/2 Model BTX500 ANC
Please read the entire instruction manual before using the product and
then save it for future reference. We reserve the right for any errors in
text or images and any necessary changes made to technical data. In
the event of technical problems or other queries, please contact our
Customer Services.
Safety
• Protect your hearing. Listening on high volume for prolonged
periods can lead to permanent hearing loss. Set the volume to
a low level before using the product.
• Be careful when using the product if it poses a possible danger
to yourself or others due to your inability to clearly hear your
surroundings.
• Never subject the product to high temperature, dust, heavy
vibration, or impacts.
• Keep the charging case away from water or other liquids.
• Do not place the product in continuous sunlight or near naked
flames.
• Never attempt to tamper with or modify the product in any way.
• Never let the battery charge for extended periods when it is not
in use. Discontinue charging during thunderstorms.
• Check your local regulations regarding mobile phone use in
combination with driving.
• Turn off both the product and mobile phone in areas where you
are requested to do so, such as in hospitals, aircraft or areas
where there is a risk of explosion.
Care and maintenance
Clean the headphones using a lightly moistened cloth. Use only mild
cleaning agents, never solvents or corrosive chemicals.
Responsible disposal
This symbol indicates that this product should not be
disposed of with general household waste. This applies
throughout the entire EU. In order to prevent any harm to
the environment or health hazards caused by incorrect
waste disposal, the product must be handed in for recycling
so that the material can be disposed of in a responsible manner.
When recycling your product, take it to your local collection facility or
contact the place of purchase. They will ensure that the product is
disposed of in an environmentally sound manner.
English
Buttons and functions
1
5
2
4
3
1. Charging case 5. LED indicator
2. USB-C aconnection 6. Earbuds
3. LED indicator 7. Charging pins
4. Multi-function button 8. Microphone
Charging
Charge the battery for 1.5 hours before using the earphones for
the first time. Note! The case and the earbuds can be charged at
the same time.
Charging the case
1. Connect the charging cable to the
h 5 1 . ~
USB-C port on the case and to a
computer or other USB charger.
2. The LED indicator (5) will shine with
a red light while the case is charging.
3. When the battery is fully charged
the LED indicator will shine with a
steady white light.
h 5 1 . ~
Charging the earbuds
1. Put both earbuds in
the charging case.
2. The LEDs on the earbuds are red
when they are being charged.
3. When the earbuds are fully
charged the LEDs will shine with a
white light for 30 seconds before
going out.
Operating instructions
6
On/Off
On − use the earphones with a previously paired device
Switch the earbuds on either by
taking them out of the charging
case or, if they are not in the
7
case, by holding the multifunction
button on both buds for about
8
2 seconds. They will connect
automatically.
Av
Switch the earbuds off either
by putting them in the charging
case and closing the lid or by
holding the multifunction button
pressed on both buds for about
6 sec.
Bluetooth connection
ON
1. Switch on the earbuds by taking them out of the charging case.
The LED on one earbud will emit a fixed white light and the LED
~1.5 h
on the other earbud will emit a flashing white light.
~1.5 h
2. Activate Bluetooth mode on the external device that you want
to connect to the earbuds. They will appear on your device as
exibel BTX500 ANC. Select "Connect".
3. Playback can be controlled from your device and the earbuds in
accordance with the following sections.
~1.5 h
~1.5 h
Note:
• The earphones will automatically connect to the last connected
~1.5 h
device if they are on and Bluetooth is activated on the last
connected device.
• Pairing mode willautomatically turn off after 5 minutes if no
pairing has been made.
~1.5 h
• If you receive a call while listening to music via Bluetooth,
playback will be stopped automatically. Once the call ends,
music playback will automatically be resumed (if your phone
settings supports this).
and
OR
2 s
and
OR
6 s
Bluetooth
L R
Devices
exibel BTX500 ANC