Exibel Andesite Quick Start Manual

Wireless earphones
Art.no 39-2655-1/2 Model Andesite
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right for any
errors in text or images and any necessary changes made to
technical data. In the event of technical problems or other queries,
please contact our Customer Services.
Safety
• Never subject the headphones to high
temperatures, dust, heavy vibration, impacts,
water or moisture.
• Check your local regulations regarding mobile
phone use in combination with driving.
• Shut off both the headphones and mobile
phone in areas where you are requested to
do so, such as hospitals, aircraft or explosive
environments.
• Protect your hearing. Listening on high
volume for prolonged periods can lead to
permanent hearing loss. Set the volume to a
low level before using the product.
• Never leave the product charging for
extended periods when it is not in use.
Discontinue charging during thunderstorms.
• Never attempt to tamper with or modify the
product in any way.
• Don't let children play with the product.
English
Buttons and functions
1. [ M ] Equlizer mode/
Voice assistant
2. [ + ] Next track,
increase volume
3. [ − ] Previous track,
decrease volume
4. [ ] On/off, play/pause,
pairing
5. 3.5 mm connection
for an external audio
source
6. Pairing status indicator
7. USB C port for the included charger cable
8. Battery charge status indicator
Charging
Charge the battery for 3 hours before using the earphones for
the first time.
1. Connect the included charger lead to the earphones'
charging port and to a computer or other USB charger.
2. The LED indicator (8) shines red when charging is in progress.
3. The LED indicator shines blue once the battery is fully charged.
Operating instructions
On/off button
On − use with a previously paired external device
Hold [ ] for approximately
3 seconds. The earphones will
automatically connect
ON
Off
Hold [ ] for approximately
5 seconds.
1
2
3
4
7
5
On − to use the earphones with a new external device
8
6
Follow the instructions in the Bluetooth connection section.
Bluetooth connection
1. Hold [ ] for approximately 2 seconds. Release [
the LED indicator (6) flashes red/blue.
2-3h
2. Activate Bluetooth mode on the device that you want to
connect the earphones to.
3. The earphones will appear on your device as
exibel Andesite. Select it to pair with the device.
4. Start playback on your external Bluetooth device.
Set the volume level on the external device or on the volume
controls on the earphones.
5. Playback can be controlled from your external Bluetooth
device or the buttons on the earphones in accordance with
the Buttons and functions section.
Note:
• The earphones will automatically connect to the last
connected device if they are on and Bluetooth is activated on
the last connected device.
• Pairing mode willautomatically turn off after 5 minutes if no
pairing has been made.
• If you receive a call while listening to music via Bluetooth,
playback will be stopped automatically. Once the call ends,
music playback will automatically be resumed (if your phone
settings supports this).
3 s
OFF
Bluetooth
Devices
exibel Andesite
3 s
] when
5 s