Exibel Tenorite E22 Manual

True Wireless
Stereo Earbuds
Art.no 39-1365-1, 2, 3 Model Tenorite/E22
Please read the entire instruction manual before using the
product and then save it for future reference. We reserve the
right for any errors in text or images and any necessary changes
made to technical data. If you have any questions concerning
technical problems please contact our Customer Services.
Safety
Important!
• Protect your hearing. Listening on high volume for prolonged
periods can lead to permanent hearing loss. Set the volume
to a low level before using the product.
• Be careful when using the product if it poses a possible
danger to yourself or others due to your inability to clearly
hear your surroundings.
• Never subject the product to high temperatures, dusty
environments, heavy vibrations or impacts.
• Keep the product away from water and other liquids.
• Do not place the product in direct sunlight or near naked flames.
• Never attempt to tamper with or modify the product in any way.
• Only use the included charging cable.
• Never leave the product charging for extended periods when
it is not in use. Discontinue charging during thunderstorms.
• Check your local regulations regarding mobile phone use in
combination with driving.
• Turn off both the product and mobile phone in areas where
you are requested to do so, such as in hospitals, aircraft or
areas where there is a risk of explosion.
UNITED KINGDOM - internet: www.clasohlson.co.uk
English
Buttons and functions
1. Left earbud
LED indicator
1
2. Left earbud
touch panel 2
3. Right earbud
LED indicator
4. Right earbud
touch panel
5. Charging case
6. USB-C port for the
included charging cable
7. Charging case
5
LED indicator
Instructions for use
Charging the charging case
Charge the battery built into the case for 1.5 hours before
charging the earbuds for the first time.
1. Connect the included charging cable to the USB-C port (6) on
the charging case and to a computer or other USB charger.
2. The LED indicator (7) on the charging case will flash white
whilst charging is in progress.
3. The indicator will shine with a constant white light when
the case battery is fully charged.
Charging the earbuds
The earbuds should be charged fully for 1.5 hours before they
are used for the first time.
1. Place both earbuds into the charging case.
2. The LED indicators (1 and 3) on the earbuds will shine
orange and the LED indicator on the case will shine white
whilst charging is in progress.
3. The LED indicators will cease to shine when the earbuds are
fully charged.
Connecting to a Bluetooth device (pairing)
Before the earbuds can be used they must first be paired with a
Bluetooth device. Each Bluetooth device only needs to be paired
with the earbuds once.
3
1. Make sure that the earbuds are turned off by checking that
4
their LED indicators are not shining.
2. Switch the earbuds on either by opening the charging case
if they are inside or if they are not in the case, by pressing the
touch panels (2) and (4) for about 3 seconds until the LED
indicator on the right earbud begins to flash orange and white.
3. Activate Bluetooth mode on the external device that you
want to connect the earbuds to. Search for the earbuds on
your Bluetooth device (refer to the manual for your device).
6 7 4. The earbuds will appear on your device as Tenorite, select
connect.
Note:
The pairing mode only activates for 180 seconds. Once that time
has elapsed, the earbuds will need to be restarted.
Note:
The earbuds will automatically try to connect to the device they
were last connected to if they are switched on and Bluetooth is
activated on the last connected device.
Switching on/off
OR
1×
On
Switch the earbuds on either by opening the charging case if
they are inside or if they are not in the case, by pressing the
touch panels (2) and (4) for about 3 seconds.
3 s
5 s
Bluetooth
Devices
Tenorite
3 s
5 s
2×