Summary of Contents for HAMPTON BAY TILSON PARK FHPS80007
Page 1
USE AND CARE GUIDE TILSON PARK OUTDOOR STEEL FIREPLACE 62 Questions, problems,missing parts? Before returning to the store, Call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON...
Important Safety Information WARNING: Fireplace is for outdoor use only. WARNING: Failure to follow the dangers, warning and cautions in this manual may result in serious bodily injury or death, or in a fire or an explosion causing damage to property. IMPORTANT NOTICE Read and understand all warnings and precautions prior to assembly and use of your gas replace.
Page 4
Important Safety Information (continued) • Do not store or use gasoline or other ammable vapors an d liquids within 25 feet (7.62m) of this or any other appliance. Do not store any combustible materials in the base enclosure. • The use of alcohol, prescription or non-prescription drugs may impair an individual’s ability to properly assemble or safely operate this outdoor replace.
Important Safety Information (continued) PROPANE (LP) DANGERS AND WARNINGS LP GAS LP gas is flammable and hazardous if handled improperly. Become aware of the characteristics before using any LP gas product. Propane Characteristics: • Flammable, explosive under pressure, heavier than air and settles in pools in low areas. •...
Important Safety Information (continued) HOSE AND REGULATOR ASSEMBLY AND REPLACEMENT This fire table comes equipped with a standard LP gas hose and regulator including the appliance side connection for a CGA 791 Cylinder Connection Device. The LP gas hose and regulator supplied with this fire table must be used. Only a hose and regulator specified by manufacturer can be used for replacement.
Warranty 1 YEAR FRAME WARRANTY WHAT IS COVERED We warrant the frame to be free of manufacturing defects to the original purchaser for one year. WHAT IS NOT COVERED It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover commercial use, hardware, acts of nature, fire, freezing, and abusive use.
Pre-Assembly (continued) PACKAGE CONTENTS Part Description Quantity Part Description Quantity Burner Head Top Lid Pilot Housing Top Frame Left Panel Manual Electric Igniter Right Panel Control Knob Back Panel Regulator/Hose Assembly Front Panel Pumice Stone Log 1 Left Clapboard Log 2 Support Tube Log 3 Top Clapboard...
Assembly Connecting the Support Tube to the Base Attach the support tube (H) to the base (J) using the M6X15 combination bolts (AA). Fully tighten all bolts at this step. Connecting the Left Panel and Right Panel to the Base Attach the left panel(C) and right panel (D) to the base(J) using the M6X15 combination bolts (AA).
Page 10
Assembly (continued) Connecting the Back Panel and the Front Panel to the Left Panel and Right Panel Attach the back panel (E) and the front panel (F) to the left panel (C) and the right panel (D) using the M6X15 combination bolts (AA). Fully tighten all bolts at this step.
Page 11
Assembly (continued) Connecting the Top Clapboard to the Left Clapboard and the Right Clapboard Attach the Top Clapboard (I) to the left clapboard (G) and the inner panel (X) using the M6X15 combination bolts (AA). Fully tighten the bolts at this step. Connecting the Top Frame to the Panels Attach the top frame(B) to the left panel(C), the right panel(D), the back panel(E) and the front panel(F) using the M6X15 combination bolts (AA).
Page 12
Assembly (continued) Placing the Top Lid to the Fire Place Place the top lid (A) to finish the assembly of the re place as shown below. Placing the Pumice Stone and the Logs Place the pumice stone (R) and the logs (S&T&U&V&W) to the burner Bowl. CAUTION: To ensure proper function, the screen on this burner should be free of pumice stone.
Operation Installing the LP Gas Tank Loosen LP gas tank retainer bolt by turning counterclockwise. Secure tank by turning LP gas tank retainer bolt clockwise until tight. CAUTION: LP gas tank must be properly disconnected and removed prior to Connecting LP Gas Tank Before connecting, be sure there is no debris caught in the head of the LP gas tank, in the head of the regulator valve or in the head of the burner ports.
Page 14
Operation (continued) Disconnecting LP Gas Tank Before disconnecting make sure the LP gas tank valve is “CLOSED”. Disconnect regulator/hose assembly from LP gas by turning knob conterclockwise until it is loose. Place the protective cap cover on the LP gas tank and store it outdoors in a well-ventilated area out of direct sunlight. NOTE: Checking for Leaks and Burner Connections the “Important Safety Information”...
Page 15
Operation (continued) Tank/Gas Line Connection Leak Test Make 2-3 oz. of leak detection solution by mixing one part liquid dishwashing soap with three parts water. Make sure the switch knob is in the “OFF” position. Connect LP gas tank per “CONNECTING LP GAS TANK” section. Turn LP gas tank valve to “OPEN”.
Page 17
Operation (continued) Failure to follow these instructions CAUTION: could cause a fire or an explosion which can cause death, serious bodily injury or damage to property. NEVER light the burner with WARNING: the cover on the outdoor replace. Keep outdoor gas appliance area CAUTION: Figure 3 Figure 5...
Page 18
Operation (continued) LIGHTING (CONTINUED) 11. If igniter does not light burner: a. Wearing heat-resistant gloves, position a long, lit match or long, lit butane lighter near the pilot housing. b. Push and turn control knob to “ON”. c. Remove match/lighter once burner is lit. 12.
Care and Maintenance Cleaning Surfaces 1. Wipe surfaces clean with mild dishwashing detergent or baking soda mixed with water. 2. For stubborn stains, use a citrus-based cleaner and a nylon scrubbing brush. 3. Rinse clean with water. 4. Allow to air dry. Before Storing 1.
Troubleshooting Make sure that the regulator is securely attached to the The LP gas tank valve is closed. LP gas tank per the "Installing the Gas Tank" section. Then turn the LP gas tank valve to "OPEN." The LP gas tank is low or empty. Exchange, refill or replace LP gas tank.
Page 21
Troubleshooting Exchange, refill or replace LP gas tank Out of gas. 1. T control knob to “OFF”. 2. Wait 30 seconds and light outdoor replace per “Lighting” section. 3. If flames are still too low, reset the overfilling prevention device: a.
Page 22
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HOMEDEPOT.CA Retain this manual for future use.
Need help?
Do you have a question about the TILSON PARK FHPS80007 and is the answer not in the manual?
Questions and answers