Wireless keyboard and mouse
Art. no. 39-2555
Model KG9025 + G1123E6
Please read the entire instruction manual before using the
product and then keep it for future reference. We accept no
liability for any errors in the text or images and we reserve the
right to make any necessary changes to technical data. If you
have technical problems or other questions, please contact our
customer service team.
Safety
•
Do not expose the keyboard or mouse to impacts or shocks.
•
Do not put the keyboard or mouse where there is a risk that
they might fall into water or other liquids.
•
Do not put the keyboard or mouse close to a powerful heat
source or expose them to direct sunlight for long periods.
•
Never attempt to dismantle, repair or modify the keyboard or
mouse in any way.
Package contents
1. Wireless optical mouse
2. USB receiver
3. Wireless keyboard
1
Using the keyboard and mouse
Battery – mouse
1. Remove the battery cover on the base of the mouse and
insert one AA/LR6 battery. Check the markings in the bottom
of the battery holder to make sure that the polarity is correct.
2. Remove the USB
receiver from its storage
compartment (a) on the
base of the mouse.
3. Replace the battery
cover.
Batteries – keyboard
1. Remove the battery cover on the bottom of the keyboard.
2. Insert two AAA/LR03 batteries. Check the markings in the
bottom of the battery holder to make sure that the polarity
is correct.
3. Replace the battery cover.
Connecting the mouse and keyboard
1. Plug the USB receiver (2) into an empty USB port on
your computer.
2. Switch on the mouse using
2
the [ON/OFF] switch (b) on
the base.
3
3. Switch on the keyboard
using the [ON/OFF] switch
(c) on the base.
Note: When the keyboard is switched on, the LEDs for the
Num Lock, Caps Lock and Scroll Lock keys will light up for
3 seconds. They will switch off after 3 seconds to save
battery power, but the functions will stay active.
4. The mouse and the keyboard will connect automatically.
Standby mode
If the mouse is not used for 10 minutes, it will go into standby
mode to save battery power. Press either of the buttons or
move the scroll wheel to reactivate the mouse.
Cleaning and care
a
Clean the keyboard and mouse with a damp cloth. Use only
mild cleaning agents. Never use solvents or corrosive chemicals.
Remove the battery from the keyboard and the mouse if you are
not going to use them for a long time.
Responsible disposal
This symbol indicates that the product should not be
disposed of with general household waste. This applies
throughout the entire EU. To prevent any harm to the
environment or health hazards caused by incorrect
waste disposal, the product must be handed in for
recycling so that the materials can be disposed of in
a responsible way. To recycle the product, take it to your local
recycling facility or contact the retailer. They will ensure that the
product is disposed of in an environmentally sound manner.
Specifications
Mouse
Battery
1 × AA/LR6
DPI
1200/1600/2400
105.1 × 61.77 × 34.07 mm
Dimensions
Keyboard
b
Battery
2 × AAA/LR03
Dimensions
411 × 116.3 × 21.2 mm
c
English
Need help?
Do you have a question about the KG9025 and is the answer not in the manual?
Questions and answers