Part-4 Useful Information; Troubleshooting; Specifi Cations; Specifications - Casio PCR 272 - Cabinet Design Cash Register User Manual

Tax Tables
Part 4

1. Troubleshooting

Symptom/Problem
1 E01 appears on the display.
2 E08 appears on the display.
3 E94 appears on the display.
No date on receipt.
4
Paper is not advancing enough.
Drawer opens up after ringing up
5
only one time.
Not clearing totals at end of day
6
after taking report.
Programming is lost whenever
7 register is unplugged or there is
a power outage.
Register is inoperative.
8
Can't get money out of drawer.
Note: If you cannot resolve your diffi culty, please feel free to call your dealer or 1-800-638-9228.
2. Specifi cations
INPUT METHOD
Entry:
Display (LED): Amount 8 digits (zero suppression); Department/PLU No.; No. of repeats
PRINTER
Journal:
(or Receipt)
Paper roll:
CALCULATIONS
Entry 8 digits; Registration 7 digits; Total 8 digits
CALCULATOR FUNCTION
8 digits; Arithmetic calculations; Percent calculations
Memory protection batteries:
The effective service life of the memory protection batteries 3 (UM-3, or R6P (SUM-3) type
batteries) is approximately one year from installation into the machine.
Power source/Power consumption:
Operating temperature:
Humidity:
Dimensions:
Weight:
Specifi cations and design are subject to change without notice.
E
36
USEFUL INFORMATION
Most common causes
Changing modes without complet-
ing transaction.
Sign on operation is not performed.
Printer paper is jammed.
Printer is programmed as a journal. Program printer to print receipts.
Department is programmed as a
single item dept.
Using X mode to take out reports. Use Z mode to take out reports.
Bad or no batteries.
No power.
10-key system; Buffer memory 8 keys (2-key roll over)
14 digits (Amount 10 digits, Symbol 3 digits)
Automatic paper roll winding (journal)
58 mm × 80 mm ∅ (Max.)
32°F to 104°F (0°C to 40°C)
10 to 90%
7 "(H)×13"(W)×14
3/8 3/16
(188 mm(H)×330 mm(W)×360 mm(D))
9 lbs (4 kg) with S drawer
See the rating plate.
"(D) with S drawer
Solutions
Return mode switch to where it stops buzz-
ing and press p .
Prior to starting registration of any other
Z <
operation, press ~
Remove jammed paper. Turn Mode switch
to OFF then turn to ON, or Turn power OFF
and then turn power ON.
Program the dept. as a normal dept.
Put in new batteries and program again.
Pull lever underneath register at rear.
and then : .