Page 1
10007 Have a sloping bend 4-Way Side Connectors 12174 Have a sharper bend 4-Way Top Connectors 10009 Have a sloping bend 10026 1/2 Cover 150 Callender Road Bolts 3/8" x 5" Watertown, CT 06795 10040 Ratchet PAGE 1 01-62656 7/11/05...
Page 2
Description Part # Qty. 10014 Temporary 15" Auger Anchors 10015 Cable - 1' Lengths 10016 Cable Clamps 2 1/2" 10017 Bolts 1/4" 1/4 " Bolts 2" 01013 (for half clamps) Base Feet 10213 Nuts 1/4" 01010 Half-Clamps for middle legs 10022 Half-Clamps for corner legs 10023...
Page 3
Layout Roof Parts 10007 12171 12173 12162 12162 12161 12161 (39.5") (23.7") (23.7") (39.5") 12164(39.8") 12164(39.8") 12164(39.8") Note: When Installed the welded socket 12163(39.8") 12163(39.8") 12163(39.8") for the cross rail must be below the bend 12174 12174 12161 12162 12162 12161 10009 (23.7")
Page 4
Step 4 (ATTACHING & SECURING BASE FEET) Depending on the model you have purchased, your base feet will either fit onto the outside of the leg poles, or slide inside the leg poles. After installing Base Feet Plates onto bottom of Middle leg Poles,be sure to line up the pre-drilled hole in the leg with the pre-drilled hole in the base foot.
Page 5
01013 clamps 01013 clamps 10022 10023 01011 01011 01010 01010 middle leg corner leg Fig. 13 Fig. 12...
Need help?
Do you have a question about the 62656 and is the answer not in the manual?
Questions and answers