Recharging The Battery Pack - Sanyo VPC CA6 - Xacti Camcorder - 6.0 MP Instruction Manual

Digital movie camera
Hide thumbs Also See for VPC CA6 - Xacti Camcorder - 6.0 MP:
Table of Contents

Advertisement

Recharging the battery pack

Be sure to fully charge the supplied or separately sold battery pack
before using it in your camera. For charging the battery pack, use the
supplied charger.
Charge the battery pack if it is being used for the first time, and
recharge it whenever the remaining charge is low (see "CHECKING THE
REMAINING BATTERY PACK CHARGE" on page 148).
If there is interference to your TV or radio during recharging...
i Move the battery pack and charger further away from the TV or radio.
Ambient temperature during recharging
i During recharging, the charger and battery pack will be warm. This is
normal and does not indicate a malfunction.
i It is recommended that the ambient temperature during recharging be
between about 0 °C and 40 °C (32°F and 104°F). Due to the
characteristics of the battery pack, at temperatures below 0 °C (32°F), it
may not be possible to sufficiently recharge it.
i When the battery pack temperature is high, it may take longer to recharge
it.
Recharge a battery pack in the following cases
i A battery pack which has not been used for a long time
i Newly purchased battery pack
22
English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xacti vpc-ca65gxXacti vpc-ca65ex

Table of Contents