Checking The Remaining Battery Pack Charge - Sanyo VPC CA6 - Xacti Camcorder - 6.0 MP Instruction Manual

CHECKING THE REMAINING
BATTERY PACK CHARGE
When using the battery pack, the remaining battery pack charge can be
checked on the monitor. Make sure to check this indicator before recording.
For an indication of the possible length of time for battery pack operation, see
page 180.
1
Display the RECORDING MENU or
PLAYBACK MENU (pages 61 and
85).
h The battery pack remaining charge
indicator appears in the lower right
corner of the monitor.
h Due to the battery pack
characteristics, when the ambient
temperature is low,
appear early for an incorrect
indication of the remaining charge.
Also, depending on the conditions
of use of the camera or the ambient
conditions (temperature, etc.), the
indicated remaining charge may
change. Therefore, this indication can
only be used as a general
approximation of the remaining
charge.
Battery pack
remaining
charge indicator
may
Battery remaining charge
Approx. full.
Power is low.
It will soon be impossible to record or play
back.
If this icon flashes when the [
[ ] button is pressed, recording is not
possible. Recharge the battery pack.
RECORDING MENU
MOVIE
640×480 30fps SHQ
MPEG-4 AVC/H. 264
Battery pack remaining
charge indicator
] button or
English
148