– Test certificate Your Leica Camera AG REPLACEMENT PARTS/ACCESSORIES Contact Leica Customer Care or your specialist Leica retailer for details on the latest spare parts/accessory range: https://en.leica-camera.com/Stores-Dealers/Leica-dealer-locator The device uses an invisible laser beam. Please read the chapters “Safety Remarks”...
Number IEC 60825-1 Ed. 3, effective May 8, 2019, this product www.cert.leica-camera.com complies with the performance standards for laser products under Please contact The Leica Camera AG Product Support in case of any further questions: Am Leitz-Park 5, 35578 Wetzlar, Germany 21 CFR 1040.10 and 1040.11.
• Never aim the laser at an eye. • Do not aim the laser at people or animals. GENERAL INFORMATION • Avoid looking directly at bright light sources with your Leica Rangemaster to prevent eye injury.
• Never dispose of batteries in fire and never attempt to heat, • Do not attempt to disassemble, reassemble or repair the Leica recharge, dismantle or break open a battery. Rangemaster yourself. Emitting laser radiation may pose a •...
• Leica Camera AG does not accept liability for the accuracy of • Low temperatures impair battery performance. Carry the range- values transmitted from third-party devices.
The Leica warranty does 5. In case of a warranty claim, please send the Leica product, the not impact on any statutory consumer rights in accordance with original proof of purchase and a description of the fault to Lei- relevant national law or any consumer rights vis-a-vis the retailer ca Camera AG Customer Care or a Leica regional subsidiary.
IMPACT POINT CORRECTION ................23 WARNING .......................4 KESTREL CORRECTION VALUES ( ) ............23 CAUTION ......................5 LEICA HUNTING APP ..............24 IMPORTANT INFORMATION ............6 CONNECTION ....................24 WARRANTY ..................7 REMOTE CONTROL ..................25 TABLE OF CONTENT ................ 8 FIRMWARE UPDATES .................
Page 9
Definition of the various categories of information found in this manual Note – Additional Information Caution – Non-compliance may result in damage to the device and accessories – Non-compliance may result in personal injury Warning – Non-compliance may result in serious injury or death...
PART DESIGNATIONS Menu Selection Button (meter/yard display), (Bluetooth), (ballistic EU.US bALL curve), (zeroing distance), (ballistic output formats), (display brightness) brtn Main switch Activation and deactivation of the rangefinder Index for diopter setting Diopter scale Eyecups (rotating) Use without eye glasses: turn in counter-clockwise direction Eyepiece Strap lugs Battery compartment...
Page 11
Caution Never look directly at the sun or other bright sources of light through your Leica optics! Doing so may seriously damage your eyes! Warning Make sure the weapon is not loaded before doing any work or changing settings on the rifle scope and before changing...
PREPARATION INSERTING/CHANGING THE BATTERY A cylindrical 3 V lithium cell (type CR 2) is required for power supply. ATTACHING THE CARRY STRAP ▸ Turn the lid over the battery compartment in anti-clockwise direction ▸ Remove the lid ▸ Thread the small loop of the carry strap through the strap lug ▸...
SETTING THE EYECUP DIOPTER SETTINGS The position of the eyecups will depend on whether you wear Diopter compensation is available for vision defects of up to ± eyeglasses or not. Contact lens wearers can make the settings just 3.5 diopters to allow the use of this product without eyeglasses. like anyone not wearing any eyeglasses.
SETTINGS AND OPERATION MENU CONTROL ACCESSING THE MAIN MENU ACTIVATING THE RANGEFINDER ▸ Press and hold the menu selection button (≥3 s) ▸ Press the main switch • EU.US appears. • The device switches on and the target mark appears. NAVIGATING IN THE MAIN MENU Note •...
SETTING THE DISPLAY BRIGHTNESS SETTING THE ZEROING DISTANCE The brightness sensor can regulate the display brightness automat- ▸ Press and hold the menu selection button ically or can be set manually in several increments. ▸ Press the menu selection button 3x briefly ▸...
METERING OPERATION SCAN MODE (OBJECT TRACKING) DISTANCE MEASUREMENT MADE EASY ▸ Press the main switch briefly ▸ Aim the target mark at the object ▸ Press the main switch again • The target mark disappears briefly and the measured value is displayed.
METERING RANGE/ACCURACY The following range/accuracy applies in sunlight and with good visibility: Maximum range is achieved in the following scenarios. Range Accuracy (1σ) Accuracy (1σ) – Highly reflective target objects (in meters) Normal Operation Scan mode – At a visual range of around 10 km 10–200 ±...
DISPLAYING ATMOSPHERIC CONDITIONS These values can be displayed at any time: ▸ Press the menu selection button briefly • The reticule appears. Then the inclination angle, the tempera- ture and atmospheric pressure are displayed in quick succes- sion for around 2 seconds each. Note •...
DETERMINING THE BALLISTIC CURVE are not included in the internal device settings. Alternatively, you can calculate a curve using the Leica ballistics calculator and then For the precise determination of the impact point correction, the transfer the information to the device via Bluetooth ®...
▸ Press the main switch repeatedly, until the desired setting is CuSt use a previously saved curve from the Leica Hunting displayed – equivalent horizontal range ( – EU12 select a ballistic curve from the tables included in –...
EQUIVALENT HORIZONTAL RANGE ( HOLDOVER ( HOLd Shots at higher or lower elevation targets are subject to changed Holdover is defined as the point that you aim at with the weapon ballistic conditions. They require knowledge of the equivalent instead of the actual target point to compensate for the variation horizontal range, which is relevant for hunting.
Variations in the point of impact can be compensated by adjusting see p. 21). This requires a relevantly equipped Nielsen-Keller- the reticle on your rifle scope accordingly. mann device (Kestrel models). The device connects to the Leica rangemaster via Bluetooth to receive data like the measured dis- ®...
LEICA HUNTING APP CONNECTION The Leica Hunting app allows the setting and storing of person- ESTABLISHING A CONNECTION al ballistics profiles. Install the Leica Hunting app on the mobile device. IN THE RANGEFINDER ▸ Press and hold the menu selection button ▸...
REMOTE CONTROL CARE/CLEANING All functions and settings of the Leica Rangemaster can be done • Your Leica rangefinder requires no special care. via the remote control. • Coarse dirt particles like sand should be removed with a soft brush or simply blown off.
TECHNICAL DATA Device designation LEICA RANGEMASTER CRF 3500.COM Type 9418 Magnification Lens diameter 24 mm Exit pupil 3.4 mm Twilight factor Relative brightness 11.8 Field of view (at 1,000 m/yds) 115.6 m Subjective viewing angle 6.6° Eye relief 15 mm Prism system Roof Coating on lenses: high Durable Coating (HDC™) and hydrophobic Aqua-Dura...
Please contact Leica Camera AG Customer Care for the mainte- nance of your Leica equipment and for help and advice regarding Leica products and how to order them. You can also contact the Customer Care department or the repair service provided by your regional Leica subsidiary for repairs or warranty claims.
Need help?
Do you have a question about the RANGEMASTER CRF 3500.COM and is the answer not in the manual?
Questions and answers