Asus PE1100N Series User Manual
  1. Manuals
  2. Brands
  3. Asus Manuals
  4. Desktop
  5. PE1100N Series
  6. User manual
Asus PE1100N Series User Manual

Asus PE1100N Series User Manual

Embedded computer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Manual
ASUS IoT
PE1100N
The information contained in this document has been carefully researched and is, to the best of our knowledge,
accurate. However, we assume no liability for any product failures or damages, immediate or consequential,
resulting from the use of the information provided herein. Our products are not intended for use in systems in
which failures of product could result in personal injury. All trademarks mentioned herein are property of their
respective owners. All specifications are subject to change without notice.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PE1100N Series and is the answer not in the manual?

Questions and answers

Related Manuals for Asus PE1100N Series

Summary of Contents for Asus PE1100N Series

  • Page 1 Manual ASUS IoT PE1100N The information contained in this document has been carefully researched and is, to the best of our knowledge, accurate. However, we assume no liability for any product failures or damages, immediate or consequential, resulting from the use of the information provided herein. Our products are not intended for use in systems in which failures of product could result in personal injury.
  • Page 2 PE1100N Series Embedded Computer User Manual...
  • Page 3 Copyright © 2023 ASUSTeK COMPUTER INC. All Rights Reserved. LIMITATION OF LIABILITY Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property;...

  • Page 4: Table Of Contents

    Contents About this manual ......................5 Conventions used in this manual ..................6 Package contents ......................7 Chapter 1: Getting to know your Embedded Computer 1.1 Features ........................10 1.1.1 Front view ........................10 1.1.2 Rear view ......................... 13 1.1.3 Left view .......................... 18 1.1.4 Right view ........................
  • Page 5 Chapter 4: Setting up your Embedded Computer 4.1 Requirements ......................56 4.2 Installing or Updating the OS ................56 Appendix Safety information ......................60 Setting up your system ......................60 Care during use ........................... 61 Regulatory notices ......................63 Service and Support ......................75 PE Series...

  • Page 6: About This Manual

    About this manual This manual provides information about the hardware and software features of your Embedded Computer, organized through the following chapters: Chapter 1: Getting to know your Embedded Computer This chapter details the hardware components of your Embedded Computer. Chapter 2: Using your Embedded Computer This chapter provides you with information on using your Embedded Computer.

  • Page 7: Conventions Used In This Manual

    Conventions used in this manual To highlight key information in this manual, some text are presented as follows: IMPORTANT! This message contains vital information that must be followed to complete a task. NOTE: This message contains additional information and tips that can help complete tasks.

  • Page 8: Package Contents

    Package contents Your Embedded Computer package contains the following items: PE1100N Series Terminal blocks Terminal block power adapter I/O port dust covers Wall mount kit with two (2) brackets PE Series...
  • Page 9 Actual product specifications may vary depending on the model. • If the device or its components fail or malfunction during normal and proper use within the warranty period, bring the warranty card to the ASUS Service Center for replacement of the defective components. PE Series...

  • Page 10: Chapter 1: Getting To Know Your Embedded Computer

    Getting to know your Embedded Computer...

  • Page 11: Features

    Features 1.1.1 Front view Power input jack The supplied terminal block power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the Embedded Computer. WARNING! The power adapter may become warm to hot when in use.
  • Page 12 Wi-Fi Signal LED The Wi-Fi signal LED indicates whether the Embedded Computer is connected to a wireless network. Serial (COM/CAN) Signal LED Each numbered LED indicates whether a device that is connected to the corresponding serial (COM/CAN) port on the back panel is communicating through the serial bus. Power button The power button allows you to turn the Embedded Computer on or off.
  • Page 13 LAN port The 8-pin RJ-45 LAN port supports a standard Ethernet cable for 10/100/1000 Mbps connection to a local network. Functional Earth Ground The Functional Earth Ground provides you with a grounding point. LAN port LED indications ACT/LINK LED SPEED LED LAN port Activity Link LED Speed LED...

  • Page 14: Rear View

    1.1.2 Rear view PE Series...
  • Page 15 Isolated DIO connector The Isolated Digital Input/Output (DIO) connector provides electrical isolation (up to 2500 VDC) of digital input and output signals, which allow micro controllers to detect and output logic states. The high voltage protection can be used in industrial level uses. Please refer to the illustration below for the Isolated DIO connector’s pin definitions.
  • Page 16 Serial (COM) connector The 9-pin DB9 connector allows you to connect RS-232/ RS-422/RS-485 devices that have serial ports, such as bar code scanner, modem, or printers. Please refer to the table below for the pin definitions of the different COM connectors.
  • Page 17 Serial (CAN) connector (on selected models) The 9-pin CAN Bus serial connector allows you to connect devices with a CAN interface, such as an electronic control unit (ECU). Please refer to the table below for the pin definitions of the CAN Bus connector. 1 2 3 4 5 CAN Bus 6 7 8 9...
  • Page 18 WWAN-MIMO wireless antenna jack The WWAN-MIMO antenna jack allows you to connect a wireless antenna to enhance 5G NR MIMO signals. NOTE: The 4G LTE/5G NR wireless antennas are optional and may not come bundled. WLAN Wireless antenna jack The Wi-Fi wireless antenna jack allows you to connect a wireless antenna for Wi-Fi signals.

  • Page 19: Left View

    1.1.3 Left view NOTE: The features on this side are covered with a metal cover. Ensure to remove and replace the metal cover when accessing these features. For more information on removing and replacing the metal cover, refer to Installing a nano SIM card. Debug console port (on selected models) This micro USB port allows you to connect a computer to the integrated USB to UART debug console (baud rate...
  • Page 20 Nano SIM card slot This slot allows you to insert a Nano SIM card. Force recovery pinhole The hard reset pinhole allows you to put your Embedded Computer into Force Recovery Mode to update or flash the OS. WWAN wireless antenna jack The WWAN antenna jack allows you to connect a wireless antenna to enhance 4G LTE/5G NR signals.

  • Page 21: Right View

    1.1.4 Right view Expansion slot This slot allows you to install an ASUS Expansion Module (AEM) for additional I/O ports. NOTE: Contact your ASUS sales representative for more information on AEMs. PE Series...

  • Page 22: Motherboard Overview

    Motherboard overview 1.2.1 Motherboard layout The PE1100N Series is an Embedded Computer based on a 3.5” motherboard. Refer to the table for the page numbers of the numbered items. 3.5” motherboard PE Series...
  • Page 23 Layout contents Page 3.5” motherboard USB 2.0 connector M.2 (M-key) slot M.2 (E-key) slot M.2 (B-key) slot RTC Battery connector SO-DIMM slot PE Series...

  • Page 24: Internal Connectors

    1.2.2 Internal connectors USB 2.0 connector The USB 2.0 connector allows you to connect a USB module for additional USB 2.0 ports. The USB 2.0 connector provides data transfer speeds of up to 480 MB/s connection speed. M.2 (M-key) slot The M.2 slot allows you to install an M-key (PCIe, I2C and SMBus) type 2242/2260/2280 M.2 device, such as an M.2 SSD module.
  • Page 25 M.2 (E-key) slot The M.2 (E-key) slot allows you to install an E-key (PCIe, USB 2.0, I2C, and PCM), type 2230 M.2 Wi-Fi module. NOTE: The M.2 Wi-Fi module is purchased separately. M.2 (B-key) slot The M.2 (B-key) slot allows you to install a B-key (PCIe, USB2.0/3.0) type 3042/3052 M.2 device, such as a 4G LTE, 5G NR, or AEM module.
  • Page 26 RTC Battery connector The RTC Battery connector allows you to connect a lithium CMOS battery. SO-DIMM slot The SO-DIMM slot can support the following SOMs: • NVIDIA® Jetson Orin Nano™ • NVIDIA® Jetson Orin™ NX NOTE: Your Embedded Computer comes pre-installed with a System- on-Module (SOM).
  • Page 27 PE Series...

  • Page 28: Chapter 2: Using Your Embedded Computer

    Using your Embedded Computer...

  • Page 29: Getting Started

    Getting started 2.1.1 Connect the AC power adapter to your Embedded Computer To connect the AC power adapter to your Embedded Computer: Connect the power cord to the AC power adapter. Connect the AC power adapter to the terminal block power adapter. Connect the 3-pin terminal block DC power connector into your Embedded Computer’s power (DC) input.
  • Page 30 IMPORTANT! • We strongly recommend that you use only UL-certified power adapters and cables that meet the following requirements or ones that you purchased as an option with your Embedded Computer. 65 W Power adapter Input voltage: 100-240 Vac Input frequency: 50-60 Hz Rated output current: 5.41 A-2.7 A (65.0 W) Rated output voltage: 12-24 Vdc System...

  • Page 31: Connect A Display Panel To Your Embedded Computer

    2.1.2 Connect a display panel to your Embedded Computer You can connect a display panel or projector to your Embedded Computer that has the following connector(s): • HDMI™ connector To connect a display panel to your Embedded Computer: Connect one end of an HDMI™ cable to an external display, and the other end of the cable to your Embedded Computer’s HDMI™...

  • Page 32: Connect The Usb Cable From Keyboard Or Mouse

    2.1.3 Connect the USB cable from keyboard or mouse You can connect generally any USB keyboard and mouse to your Embedded Computer. You can also connect a USB dongle for a wireless keyboard and mouse set. To connect a keyboard and mouse to your Embedded Computer: Connect the USB cable from your keyboard and mouse to any of the USB ports of your Embedded Computer.

  • Page 33: Turn On Your Embedded Computer

    2.1.4 Turn on your Embedded Computer Press the power button to turn on your Embedded Computer if it does not power on automatically when you connect it to a power source. PE Series...

  • Page 34: Turning Off Your Embedded Computer

    Turning off your Embedded Computer If your Embedded Computer is unresponsive, press and hold the power button for at least four (4) seconds until your Embedded Computer turns off. PE Series...
  • Page 35 PE Series...

  • Page 36: Chapter 3: Upgrading Your Embedded Computer

    Upgrading your Embedded Computer...

  • Page 37: Removing The Bottom Cover

    Removing the bottom cover IMPORTANT! • Ensure that your hands are dry before proceeding with the rest of the installation process. Before installing any of the features in this guide, use a grounded wrist strap or touch a safely grounded object or metal object to avoid damaging them due to static electricity.

  • Page 38: Replacing The Bottom Cover

    Replacing the bottom cover Align the screw holes on the bottom cover with those on your Embedded Computer’s chassis. Secure the bottom cover using the screws removed previously. PE Series...

  • Page 39: Installing A Nano Sim Card (Optional)

    Installing a nano SIM card (optional) Your Embedded Computer comes with two (2) nano SIM card slots. NOTE: Nano SIM cards are purchased separately. Remove the two (2) screws securing the metal slot cover, and then remove the cover. Insert your nano SIM card(s) into the nano SIM card slot(s) with the gold contacts facing up.
  • Page 40 Replace the metal slot cover, and secure it with the screws removed previously. PE Series...

  • Page 41: Installing An M.2 (E-Key) Module

    Installing an M.2 (E-key) module Your Embedded Computer comes with an M.2 (E-key) slot that allow you to install an M.2 wireless (Wi-Fi / Bluetooth) module. To install an wireless module: Remove the screw from the M.2 standoff. Align and insert the wireless card into its slot inside the Embedded Computer.
  • Page 42 ANT.2 ANT.3 ANT.2 ANT.3 Ant. Jack Module Connector ANT. 2 WLAN-MAIN ANT. 3 WLAN-AUX PE Series...

  • Page 43: Installing An M.2 (M-Key) Module

    Installing an M.2 (M-key) module Your Embedded Computer comes with an M.2 (M-key) slot that allows you to install an M.2 SSD (M-key, supports 2242/2260/2280 PCIe x4) module. To install an M.2 SSD module: Remove the screw from the standoff. If the standoff is already seated in the right mounting hole to fit your M.2 SSD module, skip to step 4.
  • Page 44 Gently push down the M.2 SSD on top of the standoff and fasten it using a screw. PE Series...

  • Page 45: Installing An M.2 (B-Key) Module

    Installing an M.2 (B-key) module Your Embedded Computer comes with an M.2 (B-key) slot that allows you to install a B-key (PCIe, USB2.0/3.0) type 3042/3052 M.2 device, such as a 4G LTE, 5G NR, or AEM module. To install a 5G NR module: Remove the screw from the M.2 standoff.
  • Page 46 Gently push down the module on top of the standoff, and then fasten it using the previously removed screw. (Optional) Connect the RF cables from the antennas to your module. Make sure that the correct cable is attached to each of the connectors by referring to the illustration below.
  • Page 47 To install a 4G LTE module: Remove the screw from the M.2 standoff. If the standoff is already seated in the right mounting hole to fit your 4G LTE module, skip to step 4. Unscrew the standoff (A) and install it to a mounting hole that matches the length of your module (B).
  • Page 48 (Optional) Connect the RF cables from the antennas to your module. Make sure that the correct cable is attached to each of the connectors by referring to the illustration below. WARNING! RF modules are intended for OEM or host integrators only. For availability of system level RF certification, check with your OEM integrator.

  • Page 49: Installing Antennas (Optional)

    Installing antennas (optional) You may install antennas to the six (6) antenna jacks located on the rear panel. The installed antennas can be connected to a 4G LTE or 5G NR module installed in the M.2 B-key slot or to a wireless card installed in the M.2 Wi-Fi slot.
  • Page 50 To install an antenna: NOTE: If your Embedded Computer came pre-installed with antenna jacks, skip to step 8. Remove the bottom cover. Refer to Removing the bottom cover for details. Prepare the RF connector and cable. Remove the rubber caps from the antenna holes. Insert the antenna jack end of the RF connector and cable into the antenna jack from within the chassis outwards.
  • Page 51 Insert the bundled O-ring to the antenna jack (A), then secure the antenna jack using the bundled hex screw (B). Connect the other end of the RF connector and cable to your wireless card (refer to Installing an M.2 (E-key) module for details) or to your 4G LTE or 5G NR module (refer to Installing an M.2 (B-key) module for details).

  • Page 52: Installing Wall Mount Brackets (Optional)

    Installing wall mount brackets (optional) Remove the four (4) rubber feet screws (A), and then remove the rubber feet from them (B). Align the wall mount brackets to the rubber feet screw holes, and then secure the wall mount brackets to your Embedded Computer using the rubber feet screws.

  • Page 53: Mounting To A Surface (Optional)

    NOTE: • The wall mount brackets are compatible with most DIN rail clips available on the market. • The rubber feet screws and wall mount bracket screws are the same screws. Mounting to a surface (optional) You can install your Embedded Computer to a suitable surface using wall mount brackets.

  • Page 54: Installing Din Rail Clips (Optional)

    3.10 Installing DIN rail clips (optional) Make sure that the wall mount brackets are already installed. Refer to the section Installing wall mount brackets for installation instructions. Align the screw holes on the DIN rail clips to the ones on the wall mount brackets as shown below.

  • Page 55: Installing The Terminal Block (Optional)

    3.11 Installing the terminal block (optional) You may install terminal blocks into the Isolated DIO connector, which allow you to support additional devices with serial ports or micro controllers by referring to the pin definitions and connecting cables to the slots on the terminal blocks as needed.

  • Page 56: Chapter 4: Setting Up Your Embedded Computer

    Setting up your Embedded Computer...

  • Page 57: Requirements

    Follow the steps below for installing and updating the OS image as they are the same. NOTE: Some systems may come pre-installed with an OS. If you are not sure, contact your ASUS sales representative. Completely power off your Embedded Computer. It must be powered off and not in suspend or sleep mode.
  • Page 58 You should now be in force recovery mode and ready to flash the OS image. Get the OS image from ASUS, and then unzip the image file to your host PC. Run the flash script or command file to start the flash process. The flash process should take a few minutes.
  • Page 59 PE Series...

  • Page 60: Appendix

    Appendix...

  • Page 61: Safety Information

    Safety information Your Embedded Computer is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system • Read and follow all instructions in the documentation before you operate your system.

  • Page 62: Care During Use

    Care during use • Do not walk on the power cord or allow anything to rest on it. • Do not spill water or any other liquids on your system. • When the system is turned off, a small amount of electrical current still flows.
  • Page 63 Lithium-Ion Battery Warning CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. NO DISASSEMBLY The warranty does not apply to the products that have been disassembled by users DO NOT throw the Embedded Computer in municipal waste.

  • Page 64: Regulatory Notices

    Regulatory notices FCC Compliance Information Responsible Party: Asus Computer International Address: 48720 Kato Rd., Fremont, CA 94538, USA Phone / Fax No: (510)739-3777 / (510)608-4555 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received including interference that may cause undesired operation.

  • Page 65: Fcc Rf Exposure Information

    FCC RF Exposure Information This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR.
  • Page 66 Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
  • Page 67 VCCI: Japan Compliance Statement Class A ITE Japan RF Equipment Statement 屋外での使用について 本製品は、 5GHz帯域での通信に対応しています。 電波法の定めにより 5.2GHz、 5.3GHz帯域の電波は屋外で使用が禁じられています。 法律および規制遵守 本製品は電波法及びこれに基づく命令の定めるところに従い使用してくだ さい。 日本国外では、 その国の法律または規制により、 本製品の使用ができ ないことがあります。 このような国では、 本製品を運用した結果、 罰せられる ことがありますが、 当社は一切責任を負いかねますのでご了承ください。 Japan JATE 本製品は電気通信事業者 （移動通信会社、 固定通信会社、 インターネッ ト プロバイダ等） の通信回線 （公衆無線LANを含む） に直接接続することがで きません。...
  • Page 68 ASUS products sold in Vietnam, on or after September 23, 2011,meet the requirements of the Vietnam Circular 30/2011/TT-BCT. Các sản phẩm ASUS bán tại Việt Nam, vào ngày 23 tháng 9 năm2011 trở về sau, đều phải đáp ứng các yêu cầu của Thông tư 30/2011/TT-BCT của Việt Nam.

  • Page 69: Taiwan Ncc Warning Statement

    Türkiye RoHS AEEE Yönetmeliğine Uygundur ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials.
  • Page 70 甲類警語 警告使用者：此為甲類資訊技術設備，於居住環境中使用時，可能會造 成射頻擾動，在此種情況下，使用者會被要求採取某些適當的對策。 Taiwan BSMI Class A Notice This product is Class A. In a domestic environment, this product may cause radio interference. You may be required to take adequate measures. 「產品之限用物質含有情況」之相關資訊，請參考下表： Taiwan Declaration of Restricted Substances Marking 限用物質及其化學符號 (Restricted substances and its chemical symbols) 單元...
  • Page 71 ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 (S.I. 2017/1206). Full text of UKCA declaration of conformity is available at https://www.asus.com/support/. The WiFi operating in the band 5150-5350MHz shall be restricted to indoor use for country listed below:...
  • Page 72 ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of EU declaration of conformity is available at https://www.asus.com/support/ The WiFi operating in the band 5150-5350MHz shall be restricted to indoor use for countries listed in the table below: Déclaration simplifiée de conformité...
  • Page 73 Společnost ASUSTek Computer Inc. tímto prohlašuje, že toto zařízení splňuje základní požadavky a další příslušná ustanovení směrnice 2014/53/ EU. Plné znění prohlášení o shodě EU je k dispozici na adrese https://www.asus.com/support/ V zemích uvedených v tabulce je provoz sítě Wi-Fi ve frekvenčním rozsahu 5 150 - 5 350 MHz povolen pouze ve vnitřních prostorech: Forenklet EU-overensstemmelseserklæring...
  • Page 74 Declaración de conformidad simplificada para la UE Por la presente, ASUSTek Computer Inc. declara que este dispositivo cumple los requisitos básicos y otras disposiciones pertinentes de la directiva 2014/53/EU. En https://www.asus.com/support/ está disponible el texto completo de la declaración de conformidad para la UE.
  • Page 75 ต้ ้องการที่่ � จำ ำ า เป็ นแล้ะเง่ � อ นไขที่่ � เ ก่ � ย ว่ข ้องอ่ � น ๆ ของบที่บั ญ ญั ต้ ิ ข ้อกำ า หนด 2014/53/EU เน่ � อ หาที่่ � ส มีบู ร ณ์์ ข องประกาศคว่ามี สอดคล้ ้องกั บ EU มี่ อ ยู ่ ที่ ่ � https://www.asus.com/support/ การที่ำ...

  • Page 76: Service And Support

    Service and Support Visit our multi-language website at https://www.asus.com/support/. PE Series...
  • Page 77 Our company network supports you worldwide with offices in Germany, Austria, Switzerland, the UK and the USA. For more information please contact: FORTEC Elektronik AG | Augsburger Straße 2b | 82110 Germering +49 89 894450-0 info@fortecag.de www.fortecag.de FORTEC Power GmbH | Lise-Meitner-Straße 3 | 64560 Riedstadt FORTEC Integrated GmbH | Augsburger Straße 2b | 82110 Germering +49 6158 8285-0 +49 89 894363-0...

Table of Contents