80W DALI D4i DT8 NFC LED Driver(Constant Current)
+
2
Important: Read All Instructions Prior to Installation
Function introduction
AC/DC power
input
GND
ACN/
DC-
DALI DIMMABLE DRIVER
ACL/
DC+
PUSH DIM
DA
N
DA
DA
L
DA
DALI signal input
AC Push input
Product Data
LED Channel
DC Voltage
Current
Output
Current Accuracy
Rated Power
Voltage Range
Frequency Range
Power Factor (Typ.)
Total Harmonic
Distortion
Efficiency (Typ.)
Input
AC Current (Typ.)
Inrush Current (Typ.)
Leakage Current
Standby Power Consumption
Anti Surge
Dimming Interface
Dimming Range
Control
Dimming Method
Dimming Curve
2
50-220V
100-550mA via NFC setting; Min.current gear lower to 0.1mA
±3%@ full load
Max. 80W
220-240VAC/VDC
0/50/60Hz
> 0.98 @ 230VAC Full load
THD ≤ 12% (@ full load / 230VAC)
>92% @ 230VAC full load
0.43A @ 230VAC
Max. 23.5A at 230VAC; 350μs duration
< 5mA /230VAC
<0.5W
L-N:1KV/ L-N-G: 2KV
DALI Device Type 8 (DALI consumption < 2mA)/ AC Push
0.1%-100%@ Max current
Amplitude/CCR dimming
Linear/ Logarithmic optional
Short Circuit
Over Current
Protection
Over Temperature
Working Temp.
Max. Case Temp.
Environment
Working Humidity
Storage Temp.
Safety Standards
WW+
WW-
Withstand Voltage
CW+
CW-
Safety &
Isolation Resistance
EMC
EMC Emission
LED Output
EMC Immunity
Others
DALI Infos
Parameter
DALI Interface Standard
Dimming Range
DA1, DA2 High Level
DA1, DA2 Low Level
DA1, DA2 Current
Bus Power Supply Voltage
Bus Power Supply Current
• In compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2
• Built-in DALI-2 interface, DALI DT8 device
• Dimmable LED driver with linear metal housing. Max. output power 80W
• 100-550mA current selectable via NFC program tool. Min.current gear lower to 0.1mA
• DALI Address/Group/Scene setting via NFC program tool
• Class Ⅱ power supply, isolated design
• High power factor and efficiency
• On/off, Dimming, Tunable White control
• Amplitude/CCR dimming, smooth and deep dimming
• Compatible with universal DALI masters that support DT8 commands
• DALI-250/251/252/253 Enabled,DALI data inside
• Integrated Max.56mA DALI BUS supply, enable to power DALI-2 sensors
• IP20 rating, suitable for indoor LED lighting applications
• 5 years warranty
Yes, recovers automatically after fault condition is removed
Yes, recovers automatically after fault condition is removed
Yes, recovers automatically after temperature drop
10% ~ 95% RH non-condensing
-40℃ ~ +80℃, 10% ~ 95% RH
& Humidity
EN61347-1, EN61347-2-13, GB/T 19510.1-2023, GB/T 19510.213-2023
I/P-FG: 1500VAC, I/P-DA: 1500VAC, O/P-DA: 1500VAC
I/P-FG: 100M Ohms / 500VDC / 25°C / 70% RH
EN55015, EN61000-3-2, EN61000-3-3, GB 17625.1-2022, GB/T 17743-2021
EN61547, EN61000-4-2,3,4,5,6,8,11
191350H, MIL-HDBK-217F @ 230VAC full load
MTBF
and 25℃ ambient temperature
Dimension
245x30x21mm (L*W*H)
Warranty
Min.
IEC62386-101, 102, 209, 250, 251, 252, 253
0.1%
Logarithmic (default)
9.5V
-6.5V
0
12Vdc
/
-25℃ ~ +60℃
Tc=90℃
5 Years
Typ.
Max.
100%
16V
22.5V
0
6.5V
2mA
16Vdc
22Vdc
55mA
60mA
Need help?
Do you have a question about the SRPL-2309iN-80CCT100-550H and is the answer not in the manual?
Questions and answers