Aiphone PG-10A Instructions

AIPHONE
PAGING AMPLIFIER
MODELS: PG-10A
(10 watts output)
PG-30A
(30 watts output)
PG-60A
(60 watts output)
AIPHONE PG-A paging amplifiers are designed for use with AIPHONE paging intercoms. 10 watts,
30 watts and 60 watts amplfiers are available and may be installed in multiples for greater output.
- INSTRUCTIONS -
NAMES AND FUNCTIONS
(T) Power lamp
(2) Power switch
(
5
)
AC cord
(4) Output (25/70.7 volt alternative)
(5) Circuit breaker
(6) Input terminals (A & E)
© Fuse holder
(8) G terminal for grounding
SPECIFICATIONS
* Power output:
* Distortion:
* Frequency response:
* Input:
* Output:
* Power requirements:
* Power consumption:
* Dimensions:
* Weight:
PG-10A.10 watts rms
PG-30A.30 watts rms
PG-60A.60 watts rms
Less than 3% at 1,000 Hz rated output
±3 db, 100- 15,000 Hz
100 mV for rated output
25 volts and 70.7 volts balanced
120 volts AC, 50/60 Hz
PG-10A.30 watts
PG-30A.75 watts
PG-60A.130 watts
PG-10A
245mm x 77mm x 152mm, 9-11/16" x 3-1/16" x 6"
PG-30A & PG-60A
340mm x 95mm x 205mm, 13-5/16" x 3-3/4" x 8-1/16"
PG-10A.2.7 Kg, 6.0 LBS
PG-30A.5.0 Kg, 11.0 LBS
PG-60A.6.5 Kg, 14.3 LBS