Subscribe to Our Youtube Channel
Related Manuals for Teledyne FLIR IIS FORGE IP Series
Summary of Contents for Teledyne FLIR IIS FORGE IP Series
- Page 1 Installation Guide TELEDYNE FLIR IIS FORGE® 1GIGE IP SERIES INDUSTRIAL MACHINE VISION CAMERAS Version 1.1 Revised 4/24/2025 4/24/2025 ©2015-2025 FLIR Integrated Imaging Solutions Inc. All rights reserved.
- Page 2 For more detailed information about recycling of this product, please contact us. Trademarks Names and marks appearing on the products herein are either registered trademarks or trademarks of Teledyne FLIR, LLC and/or its subsidiaries. Licensing To view the licenses of open source packages used in this product please see...
-
Page 3: Table Of Contents
6.3 Data Interface Connector 6.3.1 Ethernet Connector 6.4 Data Interface Cables 6.5 General Purpose Input/Output (GPIO) 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions Installation Guide Inc. All rights reserved. This document does not contain export-controlled information. - Page 4 7.4 Output Timing Characteristics 8 Troubleshooting 8.1 Support Contacting Teledyne FLIR IIS Revision History 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions Installation Guide Inc. All rights reserved. This document does not contain export-controlled information.
-
Page 5: Forge 1Gige Ip67 Camera Installation Guide
These resources as well as knowledge base articles and application notes can be found on the webpage for the product. Forge 1GigE IP Camera Resources and Support 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions Installation Guide Inc. -
Page 6: Handling Precautions And Camera Care
Terms and Conditions on our website. Your Teledyne FLIR IIS machine vision camera is a precisely manufactured device and should be handled with care. Here are some tips on how to care for the device. Avoid electrostatic charging. When handling the camera unit, avoid touching the lenses. Fingerprints will affect the quality of the image produced by the device. -
Page 7: Forge 1Gige Ip67 Camera Installation
Data Interface Card) Tripod adapter (optional) (see Mounting your Forge 1GigE IP67 Camera) Teledyne FLIR IIS sells a number of the additional parts required for installation. Visit the Teledyne FLIR IIS Accessories page. 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions... -
Page 8: Installing Your Interface Card And Software
Follow the steps in each setup dialog. 3. Optimize the settings of your Ethernet card a. In StartÒTeledyne Spinnaker SDKÒSpinView, right click on the Network Adapter and select Adapter Configuration. The Adapter Config Utility lists your network adapters and allows you to access the following:... - Page 9 3 Forge 1GigE IP67 Camera Installation Note: See How to Optimize GigE Network Adapter Settings for more information on configuring for best performance. 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions Installation Guide Inc. All rights reserved. This document does...
-
Page 10: Installing Your Forge 1Gige Ip67 Camera
Note: If not using GPIO, the sealing cap must remain in place to retain the IP rating of the camera. 4. Confirm Successful Installation Run the SpinView application: StartÒTeledyne Spinnaker SDKÒSpinView The SpinView application can be used to test the camera's image acquisition capabilities and make changes to the camera's installation configuration. -
Page 11: Powering Your Forge 1Gige Ip67 Camera
When the camera is power cycled (power disengaged then re-engaged), the camera reverts to its default factory settings, or if applicable, a saved user set. 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions Installation Guide Inc. -
Page 12: Tools To Control Your Forge 1Gige Ip67 Camera
Spinnaker API examples are provided for C, C++, C#, and VB.NET languages. These examples are precompiled for your convenience. 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions Installation Guide Inc. All rights reserved. This document does... -
Page 13: Using Genicam Applications
Getting Started with Matrox Design Assistant Getting Started with NI-MAX and LabVIEW Getting Started with NI Vision Builder for Automatic Inspection 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions Installation Guide Inc. All rights reserved. This document does... -
Page 14: Configuring The Forge 1Gige Ip67 Camera Setup
To manage and update drivers use the SpinView application: 1. Start SpinView: Start Menu Ò Teledyne Spinnaker SDK Ò SpinView 2. From the Devices list, select the camera and click the Switch Driver button. 3. Select the driver from the drop-down list. -
Page 15: Allocating Bandwidth-Gige
Alternatively, SpinView is a tool included with the Spinnaker SDK that allows you to set the internet protocol (IP) configuration for any GigE interface cards or Teledyne FLIR IIS GigE Vision cameras connected to your system. Using SpinView, you can: Set the IP address for the current connection. -
Page 16: Configuring Other Ethernet Settings-Gige
This is to allow a host that has stopped working to be able to take control of the camera once it is restarted or to allow a different host to take control of the camera. 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions Installation Guide Inc. - Page 17 To disable Heartbeat use: GenICam—Under Transport Layer Control GevGVCPHeartbeatDisable. Spinnaker API—The Spinnaker SDK supports disabling heartbeat. 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions Installation Guide Inc. All rights reserved. This document does not contain export-controlled information.
-
Page 18: Forge 1Gige Ip67 Camera Firmware
Firmware is programming that is inserted into the programmable read-only memory (programmable ROM) of most Teledyne FLIR IIS cameras. Firmware is created and tested like software. When ready, it can be distributed like other software and installed in the programmable read-only memory by the user. - Page 19 5 Configuring the Forge 1GigE IP67 Camera Setup Warning! Do not disconnect the camera during the firmware update process. Related Knowledge Base Articles Teledyne FLIR machine vision software and firmware version numbering systems Determining my camera's firmware version Should I upgrade my camera firmware or software? 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions...
-
Page 20: Forge 1Gige Ip67 Camera Physical Interface
See Mounting your Forge 1GigE IP67 Camera Data Interface Connector 7. GPIO connector—8-pin M8 A-coded General Purpose Input/Output (GPIO) 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions Installation Guide Inc. All rights reserved. This document does not contain export-controlled information. -
Page 21: Forge 1Gige Ip67 Camera Dimensions
3. IP67-rated when matching lens cover is installed 4. Dimensions in square brackets [] are in inches, for reference only 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions Installation Guide Inc. All rights reserved. This document does... -
Page 22: Data Interface Connector
Note: The Ethernet cable must be securely attached to the connector to retain the IP rating of the camera. Data Interface Cables To purchase a recommended cable from Teledyne FLIR IIS, visit the AccessoriesàCables page. Category 5e or 6 cables up to 100 meters in length should be used for connecting the camera to the network interface card on the host system. -
Page 23: Data Interface Card
A 1000 BASE-T NIC is recommended for streaming images on the Ethernet network between the camera and host system. How to Optimize GigE Network Adapter Settings for more information on configuring for best performance. To purchase a compatible card from Teledyne FLIR IIS, visit the AccessoriesàHost Adapter Cards page. 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions... -
Page 24: Mounting Your Forge 1Gige Ip67 Camera
Make sure the camera has enough open space around it to facilitate the free flow of air. 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions Installation Guide Inc. All rights reserved. This document does... -
Page 25: Lens Mounting
6 Forge 1GigE IP67 Camera Physical Interface Lens Mounting Lenses are not included with cameras. Teledyne FLIR IIS sells a number of lenses compatible with our cameras from our Accessories àLenses page. There is also a Lens Calculator to help choose an appropriate lens. -
Page 26: Non-Volatile Flash Memory
Related Knowledge Base Articles Removing the IR filter from a color camera Selecting a lens for your camera 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions Installation Guide Inc. All rights reserved. This document does... -
Page 27: Infrared Cut-Off Filters
±0.08 mm Thickness 1 ±0.07 mm 1 ±0.07 mm For more information, see Dust Protection. 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions Installation Guide Inc. All rights reserved. This document does not contain export-controlled information. -
Page 28: Sensor Shutter Type
Readout time for a line is equal to 1/Horizontal Line Frequency. Some advantages of global shutter are more uniform brightness and minimal motion blur. 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions Installation Guide Inc. -
Page 29: Input/Output Control
Measurement conditions: Opto-Isolated I/O 5 V 1.2 K pull up, Non-Isolated input 1 KHz square wave 2 Vp-p. Measured over operating temperature range (-20˚ C to +50˚ C ambient temperature), unless otherwise noted. 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions Installation Guide Inc. -
Page 30: Gpio Electrical Characteristics
4.7 kΩ 5.2 mA Values are for reference only Input Timing Characteristics Input Timing Characteristics 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions Installation Guide Inc. All rights reserved. This document does not contain export-controlled information. -
Page 31: Output Timing Characteristics
Cycle Rise Time 2.6 μs Cycle Fall Time 0.23 μs Opto Current 4.8 mA 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions Installation Guide Inc. All rights reserved. This document does not contain export-controlled information. -
Page 32: Troubleshooting
8 Troubleshooting Troubleshooting Support Teledyne FLIR IIS endeavors to provide the highest level of technical support possible to you. Most support resources can be accessed through your product's Support page. Forge 1GigE IP Camera Resources and Support Contacting Technical Support Before contacting Technical Support, have you: 1. -
Page 33: Contacting Teledyne Flir Iis
March 12, 2025 Support for FG-PGE-50S5 April 24, 2025 Added link to lens tube accessory ACC-EN-LC38F-60A 4/24/2025 Teledyne FLIR IIS Forge 1GigE IP67 Camera ©2015-2025 FLIR Integrated Imaging Solutions Installation Guide Inc. All rights reserved. This document does not contain export-controlled information.
Need help?
Do you have a question about the FLIR IIS FORGE IP Series and is the answer not in the manual?
Questions and answers