Ecostrad Icon iQ Quick Start Manual

Ecostrad Icon iQ
Quick Start Guide
Scan QR Code to download the full manual
Consult the full manual for safety guidance, installation
instructions, advanced settings, and warranty details.
https://www.electricradiatorsdirect.co.uk/manuals/
ecostrad/Ecostrad-Icon-iQ-Manual.pdf
Display
LED Screen
Down Key
Standby Key
Short Press Long Press
Standby Key = On/Off Standby Key
Settings Menu
Up Key =
Navigate/Increase
Up with Down
Child Lock
Down Key =
Navigate/Decrease
Confirm Key
Confirm Key = Select
WARNING - READ ALL SAFETY WARNINGS AND
Read the provided full manual carefully before using
or installing the radiator. Always store the full manual
in the immediate vicinity of the radiator or its site of
use.
Failure to follow the warnings and instructions may
result in electric shock, fire, serious injury, or all of the
above. Save all warnings and instructions for future
reference.
Respect the minimum distances from surrounding
walls, ceilings or fixed objects as stated below:
• 5 cm from the sides to masonry
• 10 cm from the sides to flammable materials
• 8 cm from the bottom to the floor
• 15 cm from the top to flammable building components
or covers (e.g. wooden windowsills or shelving)
• 10 cm from the top to non-flammable building
components or covers (e.g. stone windowsills)
Ecosystem App
Installing the Application
Up Key
Scan the QR code to download the Ecosystem app.
Confirm Key
1. Create your account.
2. Navigate to the Manage Hub.
3. Press by My Heaters.
=
4. Select the Icon iQ from the list of available radiators.
5. Follow the instructions in the application to complete the
=
connection.
= Boost
Ecostrad_Icon_iQ_Quick_Guide_V1_29072024
ALL INSTRUCTIONS.
Initial Setup
Control
• Use the Control screen to
change the mode.
• Modes include:
Manual Mode

Program Mode

Boost Mode

• Adjust the heater's
settings by entering the
Control menu and
tapping .
Set the Program (app)
Tap the Program tab on
1.
the Control interface.
2. Tap the day you wish to
program.
3. Drag and drop the Eco
and Comfort modes into
the desired intervals.
Any periods left white

will be set to Anti-
frost mode.
4. To save your program,
select Set & Save.
5. To copy your program to
another day, select Copy,
then tap the days that you
wish to copy the program
to.