Vox Delay Time - Kenwood TK-3131 - FreeTalk XLS FRS/GMRS Instruction Manual

4 Press the MENU key to select "
function is off) or "
" " (VOX gain level 3).
• While adjusting the VOX Gain, the LED lights
orange.
Note: Setting the VOX gain to OFF deactivates VOX.
In order to transmit with VOX turned off, you must use
the PTT switch.
5 Press the PTT, MON, or CAL key to exit
Setting Mode.
VOX D
ELAY
If the transceiver returns to receive mode too quickly after you
stop speaking, the end of your message may not be
transmitted. To avoid this, select an appropriate delay time
that allows your entire message to be transmitted. However,
do not make the delay overly long.
1 Turn the transceiver power OFF.
2 Press and hold the MENU key while turning
the transceiver power ON (for 1 second).
3 Press the
18
" (VOX gain level 1) to
T
IME
or key to select "
" (VOX
".