1.3
Rear panel
The system rear panel includes the power connector and several I/O ports
that allow convenient connection of devices.
1
2
3
4
5
6
7
8
9
10
11
12
13
1.
Power connector. This connector is for the power cable and plug.
2.
Voltage selector. This switch allows you to adjust the system input
voltage according to the voltage supply in your area. See the "Voltage
selector" section on page 1-6 before adjusting this switch.
3.
PS/2 mouse port. This green 6-pin connector is for a PS/2 mouse.
4.
PS/2 keyboard port. This purple 6-pin connector is for a
PS/2 keyboard.
5.
Serial port . This port connects a mouse, modem, or other devices
that conforms with serial specification.
1-4
Chapter 1: System introduction
14
15
16
17
18
19