Type Of Cut - Craftsman 21221 - 12 in. Sliding Dual Bevel Compound Miter Saw Operator's Manual

Bevel/Miter Settings
KEY BEVEL MITER
SETTING SETTING
TYPE OF CUT
IL 33.9 °
IR 33.9 °
OL 33.9 °
OR 33.9 °
31.6 o Right
31.6 ° Left
31.6 ° Left
31.6 o Right
Inside corner-Left side
1. Position top of molding against fence.
2. Miter table set at RIGHT 31.6 ° .
3. LEFT side is finished piece.
Inside corner-Right side
1. Position bottom of molding against fence.
2. Miter table set at LEFT 31.6 °.
3. LEFT side is finished piece.
Outside corner-Left side
1. Position bottom of molding against fence.
2. Miter table set at LEFT 31.6 °.
3. RIGHT side is finished piece.
Outside corner-Right side
1. Position top of molding against fence.
2. Miter table set at RIGHT 31.6 ° .
3. RIGHT side is finished piece.
42