Craftsman 21174 - Utility Sharpener Owner's Manual page 5

2& ALWAYS WEAR A DUST MASK TO PREVENT _NHAUNG DANGEROUS DUST
OR AIRBORNE PARTICLES, including wood dust, crystalline silica dust and
asbestos dust. Direct particles away from face and body. Always operate tool in well
ventilated area to provide for dust removal. Use dust collection system wherever
possible. Exposure to the dust may cause serious and permanent respiratory or
other injury, including silicosis (a serious lung disease), cancer, and death. Avoid
breathing the dust, and avoid prolonged contact with the dust. Allowing dust to get
into your mouth or eyes, or lay on your skin may promote absorption of harmfut
material. Always use properly fitting NIOSH/OSHA approved respiratory protection
appropriate for the dust exposure, and wash exposed areas with soap and water.
SAVE THESE iNSTRUCTiONS.
GUIDE LINES FOR EXTENSUON CORDS
tf you are using an extension cord outdoors, be sure it is marked with the suffix
"W-A" CW" in Canada) to indicate that it is acceptable for outdoor use.
Be sure your extension cord is properly sized, and in good electrical condition.
Always replace a damaged extension cord or or have it repaired by a qualified person
before using iL
Protect your extension cords from sharp objects, excessive heat, and damp or wet
areas.
120 VOLT OPERATION ONLY
25' LONG 50' LONG 100' LONG 150' LONG
0 to 6 Amps 18 AWG 16 AWG 16 AWG 14 AWG
6 to 10 Amps 18 AWG 16 AWG 14 AWG 12 AWG
10 to 12 Amps 16 AWG 16 AWG 14 AWG 12 AWG