Assembly; Operation - Craftsman 11580 - C3 19.2 Volt Hammer Operator's Manual

UNPACKING ,,_
This product requires assembly.
[] Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
[] Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
[] Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
[] If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LiST
Hammer Drill with Auxiliary Handle Assembly
Bits (2)
Operator's Manual
A
A
WARNING: If any parts are damaged or missing do
not operate this tool until the damaged or missing
parts are replaced. Failure to do so could result in
possible serious personal injury.
WARNING: Do not attempt to modify this tool
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING: To prevent accidental starting that
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.
ASSEMBLING AUXiLiARY HANDLE
See Figure 2.
An auxiliary handle is packed with the drill for ease of
operation and to help prevent loss of control.
[] Insert and push screw all the way through slot on drill.
[] Attach plate and auxiliary handle to screw and tighten.
[] Insert end of depth stop rod into depth stop rod slot on
the back of the plate.
DEPTHSTOPROD
SCREW
PLATE
AUXILIARY
HANDLE
SLOT
DEPTHSTOP
SLOT
Fig. 2
9