Harman JBL Legend Quick Start Manual

QUICK START GUIDE
Multimedia Receiver with Wired CarPlay™ and Android Auto™
featuring a 9" digital TFT Display
Wiring Diagram - Inputs/Outputs
20PIN
Note:
When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could
cause damage. The unit uses (1) 15 amp ATC mini style fuse located on the power connector.
Control Locations
The radio display features
1
the following functions and
displays:
2
3
1 Reset
4
2 Long press:
in on mode, power off
5
Short press:
6
In on mode, Mute on/off;
In off mode, power on;
3 Home
4 Voice Activation Button
5 VOL+
6
VOL-
CA_JBL Legend Headunit_OM_GLOBAL_SOP_10.indd 1 CA_JBL Legend Headunit_OM_GLOBAL_SOP_10.indd 1
Main Menu
Tuner Operation
1
2
4
6 7 8 9
USB Operation
From the main menu, touch the USB icon on the main screen.
1 2 3
CarPlay and
Android Auto
5
18PIN
7 8 9 10
Bluetooth Operation
Before using Bluetooth
Before you can use a Bluetooth device to make hands-free calls or stream audio. it must be authenticated.
This is also referred to as "pairing" a device.
Pairing a New Device
After enabling the BT pairing function, other devices can
search for the unit for 3 minutes, the unit can search for
other devices constantly.
Connection
The head unit will automatically connect to the last
connected device when the connection feature is set to
Auto Connect On. If the connection feature is set to Auto
Connect Off, the head unit will not automatically connect to
any device.
Bluetooth Phone
From the main menu. touch the Bluetooth on the screen.
Bluetooth icon will appear anytime a Bluetooth device is
connected.
Dialing a Number
Press to display keypad and dial a number.
Making and Ending a Call
Press to connect a call, and press
Transferring Audio
Press - to transfer sound between the head unit
and mobile phone.
Streaming Audio
Press to play or pause the music.
Press to skip to the previous track.
Press to advance to the next track.
In main menu, press the desired icon to enter
the corresponding mode: Radio/Bluetooth/Apple
CarPlay/Android Auto/USB/AV IN/Settings.
Preset Stations
1
Seek Tune Down
2
Seek Tune Up
3
4 FM/AM ( FM1\FM2\FM3\AM1\AM2)
Local/Distance
5
3
Main Menu
6
Preset
7
5
8 Auto Store Presets/Preset Scan
9 Frequency Scale
RDS
10
Keypad
11
Equalizer
10 11 12 13 12
Volume adjustment
13
4
1 Progress bar
Previous Track
2
Play/Pause
3
Next Track
4
Random
5
Repeat
6
6
Main Menu
7
Playlist
8
9 Audio Source
Video
10
Picture
11
12 Keypad
11 12 13 14
Equalizer
13
Volume adjustment
14
to end a call.
Audio Operation
Press the Settings icon on the main menu screen to adjust Fader and Balance controls, Equalizer (10-
Band Tone Control and 10 Presets EQ Settings).
General Operation
From the Main Menu screen, select Setup to access the Settings menu and select from categories
represented by the icons on the bottom of the screen: General, Audio, Display, Others. Select the
category, and adjust any of the available options using the touch screen.
CarPlay Operation
Connect your iPhone to the USB port then touch OK on your
Phone when the pop-up message appears to allow interface
accessories. The Apple CarPlay icon will now be enabled on
the main menu.
Press the CarPlay button on the Main menu to enter the
•
operation interface.
Enjoy the Carplay function.
•
Requirements
Lightning Data Cable
•
IPhone ® 5s or later
•
• IPhone with iOS 7.1 or later
• Data Plan
Maybe need to set the permissions for the
•
carplay app on your phone, open Screen
Time-->contents -->Allowed app.
Phone Setup(Before you begin):
1.Apple CarPlay ® features may operate differently than on your Apple iPhone ®.
2.Message and data charges may apply when using Apple CarPlay. Please check with your mobile carrier.
3.Apple CarPlay ® relies on the performance of your phone. If you experience performance issues:
Close all apps and then restart them again.
•
Disconnect and then reconnect your phone using the Apple Lightning cable that was provided
with your phone is recommended.
• When Apple CarPlay ® is active, your voice recognition system is disabled and you will be using
Siri ® to make your requests.
• On your phone, go to Settings > General > Restrictions > CarPlay to allow CarPlay access.
• On your phone, go to Settings > General > Siri and ensure Siri is turned ON.
On your phone, go to Settings-->General-->Carplay can adjust the position of the icon displayed
•
on the car, with or without. The option with "×" can be deleted, and the search can be done by
clicking the "+" sign below.
Apple CarPlay uses Siri to perform many actions like
sending messages, placing calls, and looking up/setting
POI/Destinations. A Siri session can be initiated on any
screen by:
Touching and holding the Home icon on the CarPlay
•
screen or
Pressing the Voice button on panel or Steering
•
Wheel, then say any of the following commands:
"Text <Name> 'Call you later'" to send a text message.
•
"Read text messages" to read available text message.
•
• "Call <Name>" to make a phone call.
"Find <POI/Destination>" to locate a POI/Destination.
•
Voice Command Button
NOTE:
Ensure Siri feature is set to ON in your phone
(Go to Settings > General > Siri).
8/29/2022 5:39:56 PM 8/29/2022 5:39:56 PM