Page 1
Last Revised Date:19 APR. 2013 Copyright ⓒ 2009 DUALi Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this document in part or as a whole for any purposes other than those for which this document is disclosed. This document is copyrighted and contains confidential information and other intellectual property rights of DUALi Inc.
Page 2
DUALi Inc. reserves the right to make changes to its applications or services or to discontinue any application or service at any time without notice. DUALi provides customer assistance in various technical areas, but does not have full access to data concerning the use and applications of customer's products.
DE-BNP User Manual Contents Summary..........................5 Structure........................... 5 The Structure of equipment....................5 Sample product....................... 6 Connector pin assignment......................7 HOST Interface ....................... 7 Description of electricity ......................7 The Description of power....................7 The using electric current ....................7 The Description of USB communication ................
DE-BNP User Manual Summary Smart Card Interface Contactless Smart Card (ISO 14443 A/B), MIFARE, ISO15693, MB89R118, MB90R112 Host Interface USB 2.0 Full Speed (12Mbps TTL-UART up to 115,200bps Host Communication Duali protocol ARM 32-bit Cortex-M3(72MHz), 64Kbytes Flash, 20Kbytes SRAM Power Voltage...
DE-BNP User Manual Connector pin assignment HOST Interface Signal Description DC5V vcc input TTL-UART RxD (Input Port) TTL-UART TxD (Open Drain) Ground Ground USB+ USB PLUS USB- USB MINUS CPU : 32bit RISC CPU, It is stm32f103 which is ARM-based 32-bit MCU with Flash, USB, CAN, seven 16-bit timers.
DE-BNP User Manual Property Environment to use Temperature to use : -10 ~ 60 ℃ Humidity to use : 30 ~ 90 % (relative humidity) Environment to keep Temperature to keep : -20 ~ 80 ℃ Humidity to use : 10 ~ 90 % (relative humidity) Warning and Notice For indoor use only.
‣ Warranty and Repair service - DUALi Inc. warrants to the original consumer or other end user that this product, DE-BNP, is free from defects in materials and workmanship for a period of 1 year from the date of purchase.
This device shall only be used with the tested antenna that is integral PCB antenna. ● Label and manual requirements for the End Product For an end product using the DE-BNP there must be a label containing, at least, the following information. FCC ID certification number for model DE-BNP.
Need help?
Do you have a question about the DE-BNP and is the answer not in the manual?
Questions and answers