Related Manuals for Soehnle Professional 7725
Summary of Contents for Soehnle Professional 7725
- Page 1 BABY SCALE 7725 User Manual Important: Read carefully before use! Keep for future reference! www.soehnle-professional.com...
- Page 2 Thank you for your purchase of this Soehnle Professional product. This product has been equipped with all state of the art features and is optimized for easy operation. If you have questions or experience problems with your baby scale that are not addressed in the user manual, please contact your Soehnle Industrial Solutions service partner or visit us over the Internet at www.soehnle-professional.com.
- Page 3 2.3 Switch on Switch on the scale with the ON/OFF key. 2.4 Switch off / Shutting down safely The device shuts down by pressing the ON/OFF key. The device is fully disconnected from the grid by pulling the power plug from the power outlet. This ends operations safely.
-
Page 4: Manual Zeroing
3. FUNCTIONS 3.1 Switching on / Zeroing On each switch on operation, the weight reading sent from the load cells is set to zero as long as this reading is less than 50% of the maximum weighing range. 3.2 Manual zeroing Manual zeroing corrects minor deviations from the zero point, e.g. -
Page 5: Hold Function
3.4 Weighing The scale is ready to weigh when "0.000" is shown in the display. Center the baby onto the scale. Never leave the baby on the scale unsupervised and return the baby to a safe environment immediately following the weighing procedure. 3.5 Hold function The weight reading continues to be shown in the display by pressing the HOLD key. -
Page 6: Malfunctions - Causes And Remedies
4. MALFUNCTIONS – CAUSES AND REMEDIES DISPLAY CAUSES REMEDIES Underload after switching on Shut the scale off and back on. The zero point is automatically reset. Overload exceeded when switching on the Remove the weight from the scale scale. and switch the scale back on. Maximum weighing range exceeded. - Page 7 The power supply specifications are noted on the plug-in power supply. The technical documentation to service the unit and needed by the staff designated as service personnel by Soehnle Industrial Solutions can be obtained on request from customer service. 5.2 Description of Signs and Symbols Maximum load of the weighing range Minimum load of the weighing range Calibrated value (reading increment: <...
-
Page 8: General Information
6. General Information 6.1 Intended uses The Soehnle Professional Baby Scale 7725 is designed to weigh infants and must only be used for this purpose. Any other use is prohibited. This scale is intended for transactions with calibration requirements. It meets the applicable requirements of the EC Directives 2014/30/EU, 2014/35/EU, 2009/23/EC and 2007/47/EC. -
Page 9: Safety Instructions
6.2 CE Marking The product carries the CE marking in accordance with the following directives: EMC Directive: 2014/30/EU Low Voltage Directive: 2014/35/EU Scale Directive: 2009/23/EC Medical Directive: 2007/47/EC Explanation of symbols: 0483 EU Conformity Tag Protection class of the product Type B application device Do not dispose of standard batteries and rechargeable batteries in the household waste... - Page 10 to ensure that it can be easily disconnected from the electrical mains (ensure accessibility of the power outlet). Do not allow the scale to get wet. This device is radio interference suppressed iaw. the applicable EC Directive 2004/108/EC. However, the reading can be influenced under extreme electrostatic and electromagnetic interference, e.g.
-
Page 11: Maintenance And Service
6.6 Maintenance and service A metrology inspection was performed during production based on the initial calibration. Additional recurring metrology inspections (calibrations) must be performed by the competent calibration authorities in accordance with the relevant national regulations. Repairs are only authorized by locations authorized by Soehnle Industrial Solutions by using original spare parts. The medical device is equipped with a non-removable power cable. - Page 12 6.8 Disposal of Standard Batteries and Rechargeable Batteries Standard batteries and rechargeable batteries that contain hazardous materials are marked with the symbol of a crossed-out waste bin and must not be disposed of in the household waste. As a consumer, you are required by law to return used standard batteries and rechargeable batteries.
- Page 13 Guidelines and Manufacturer Declarations / Electromagnetic Emissions The type 7725 baby scale is designated for operations in the electromagnetic environments indicated below. The customer or user of the type 7725 scale should ensure that the scale is used in such an environment. Emissions Measurements...
- Page 14 Guidelines and Manufacturer Declarations / Resistance to Electromagnetic Interference The type 7725 baby scale is designated for operations in the electromagnetic environments indicated below. The customer or user of the type 7725 scale should ensure that the scale is used in such an environment.
- Page 15 Guidelines and Manufacturer Declarations / Resistance to Electromagnetic Interference The type 7725 baby scale is designated for operations in the electromagnetic environments indicated below. The customer or user of the type 7725 scale should ensure that the scale is used in such an environment.
- Page 16 Baby scales of type 7725 are designated for operations in the electromagnetic environments indicated below. The customer or user of type 7725 scales can help to avoid electro-magnetic interference by complying with the minimum distance between portable and mobile HF telecommunications devices (transmitters) and the scales - depending on the output cable of the communications device, as indicated below.
Need help?
Do you have a question about the 7725 and is the answer not in the manual?
Questions and answers