Adjusting Derivative Settings - Texas Instruments TI-Nspire Manual Book

Advancing the Playback by One Point
Use this option to advance the playback point by point. The playback
must be selected and paused for this option to be available.
To advance the paused playback:
 Select
Experiment > Replay > Advance One.
The playback advances by one point until the last point is reached.
Adjusting the Playback Rate
To adjust the playback rate:
1. Select
Experiment > Replay > Playback Rate
The Playback Rate dialog box opens.
2. In the Playback Rate field, click
3. Select the rate at which the playback will play.
Normal speed is 1.00. A higher value is faster, and a lower value is
slower.
4. Select one of the following options:
• Click
Start
• Click
OK
Repeating the Playback
1. Select
Experiment > Replay > Start Playback
2. Click to start the playback and save the settings.
Start

Adjusting Derivative Settings

Use this option to select the number of points to use in derivative
calculations. This value affects the tangent tool, velocity, and
acceleration values.
Find pH derivative settings using a calculated column.
to start the playback and save the settings.
to save the settings for use on the next playback.
Working with Advanced Analysis Features
.
¤
to open the drop-down list.
.
73