Setting Up A Remote Collection Unit - Texas Instruments TI-Nspire Manual Book

Setting Up a Remote Collection Unit

Only the TI-Nspire™ Lab Cradle, TI CBR 2™, and Vernier Go!Motion®
support remote data collection.
Sensors use values currently defined in the Vernier DataQuest™
application. You must edit these collection mode values before you set
up the remote unit. For more information, see Modifying Sensor
Settings.
To select the collection unit:
1. Connect a sensor.
2. Set up the experiment by opening a new document and setting the
collection mode.
For more information, see Setting the Collection Mode.
3. Click
Experiment > Advanced Set Up > Remote Collection
4. Select a data collection device from the drop-down list.
The Remote Setup Details dialog box opens.
5. (Optional) Type the delay value.
64 Using Advanced Data Collection Options
.