E-Z UP FOOD BOOTH SIDEWALL KIT Instruction Sheet

FOOD BOOTH SIDEWALL KIT
Includes: (1) Mesh Sidewall with 2 Roll Up Serving Windows,
SET UP
1
• Start by setting up your E-Z UP® Canopy. Before attaching the Food Booth Walls, fold the
top fabric back halfway at each corner. This allows the walls to zip and wrap securely around
the corners, fitting under the top and against the frame.
2
• Ensure the Food Booth Walls are unzipped at each corner and that the toggle ties are
positioned at the top. Start on the side of the canopy where the zippered entrance will be.
Tie one end of the wall to the upper truss frame, centering the middle zipper to serve as
the entrance.
3
• From inside the shelter, move to the tie closest to the entrance and
begin securing the screen to the outer top truss near each corner.
Continue this process around the frame until all four sides of the
canopy are fully covered. For a snug fit, use the additional elastic
bands with V-hooks located around each leg of the frame.
• Zip corner walls to fully enclose your E-Z UP® Instant Shelter®
including the entrance and exit. From the outside of the Food Booth
Wall, pull top back down over the wall at corners.
ROLL UP WINDOW SET UP
• Unzip the window flap and roll it up, using the toggles to secure it in place.
INSTRUCTION SHEET
(1) Mid-Zip Mesh Entrance Sidewall, (2) Mesh Sidewalls
Attaches to any E-Z UP® 10' x 10' or
10' x 20' Straight Leg Shelter.
Frame
Legs
Window Down
Loop Top Truss Only
Corner
Window Up