Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for anko PET 2 IN 1 GATE ENCLOSURE
Summary of Contents for anko PET 2 IN 1 GATE ENCLOSURE
- Page 1 PET 2 IN 1 GATE ENCLOSURE...
- Page 2 Instructions Screws x 8pcs Masonry Plugs x 8pcs Plastic Key x 1pc...
- Page 3 To use as barrier gate Step 1. Cut tie and unfold barrier panels and gate panel. Step 2. Make sure that the gate is Position in desired location with wall mounts flat against the wall. mounted firmly and evenly in vertical position. Step 3.
- Page 4 Step 4. Remove barrier gate and drill pilot holes for screws. Step 5. Reposition barrier gate and drill screws into place. Make sure that the gate is mounted firmly and evenly in vertical position. Top view of the gate Side view of the gate...
- Page 5 Step 6. Tighten each tension knob to secure the position. Caution: If using as a fireplace barrier, ensure fireplace barrier is installed at least 60cm from fire source.
- Page 6 To use as playpen Step 1. Cut tie and unfold barrier panels and gate panel. Step 2. Use plastic key to depress the release button and pull the panel at the same time. Then Remove wall mounts from the end of barrier panel. Please refer to below image.
- Page 7 Step 3. Push release button and click into place. The open angle should be larger than 100° Step 5. Tighten each Tension knob after positioning so the playpen is secure. Check the tension before use.
- Page 8 To remove or add panels 1. To remove panels or wall mounts: Use a plastic key to depress the release button and pull the panel at the same time. 2. To add panels: Push release button and click into place.
-
Page 9: Gate Operation
Gate operation 1.Slide the release switch and lift gate panel. 3. The door is movable 180° in both directions.When equal to 90°, the door will keep open. When below 90°, the door will be auto-close. -
Page 10: Maintenance
WARNING: This enclosure is for pet use only. Install the enclosure securely and inspect the components are tight regularly. Do not place the enclosure close to an open fire or other heat source. For your pet’s safety, inspect regularly and remove if damaged. MAINTENANCE Clean the product with damp fabric.
Need help?
Do you have a question about the PET 2 IN 1 GATE ENCLOSURE and is the answer not in the manual?
Questions and answers