Advertisement
TALL & WIDE
METAL GATE
• gate with no extensions fits:
• gate with 1x 12.7cm extension fits:
• gate with 1x 25.4cm extension fits:
• gate with 1x 12.7cm and 1x 25.4cm extensions fits:
IMPORTANT! READ AND FOLLOW
THESE INSTRUCTIONS CAREFULLY
AND KEEP FOR FUTURE REFERENCE.
This product conforms to EN1930:2011.
71.5cm - 79cm
84.5cm - 92cm
96.5cm - 104cm
109.5cm - 117cm
Advertisement
Table of Contents
Related Manuals for anko 42584155
Summary of Contents for anko 42584155
- Page 1 TALL & WIDE METAL GATE • gate with no extensions fits: 71.5cm - 79cm • gate with 1x 12.7cm extension fits: 84.5cm - 92cm • gate with 1x 25.4cm extension fits: 96.5cm - 104cm • gate with 1x 12.7cm and 1x 25.4cm extensions fits: 109.5cm - 117cm IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY...
- Page 2 PARTS LIST A. 1x Safety Gate B. 4x Adhesive Pads C. 4x Wall Cups D. 4x Screws 4x Adjuster Screws 4x Mounting Bolts G. 1x 12.7cm Gate Extension H. 1x 25.4cm Gate Extension 4x Extension Pins 4x Rotary Bolt Inserts If any parts are missing, do not attempt to use your Tall &...
- Page 3 SAFETY INFORMATION WARNING To prevent serious injury or death, securely install gate or enclosure WARNING - and use according to manufacturer’s instructions. Never leave child unattended when using this product. WARNING - Incorrect installation can be dangerous. WARNING - Do not use the safety barrier if any components are damaged or missing. WARNING - The safety barrier must not be fitted across windows.
- Page 4 INSTALLATION Important: Gate must be installed in a structurally sound opening. Ensure mounting surface (wall, door frame, stair posts, etc.) is strong, rigid and has an even surface. If using gate on a stairway, it must be placed on the lowest step at the bottom. 1.
- Page 5 2. When you unpack the gate, you may notice a gap at the gate opening - this is normal with pressure mounted gates and the gap will disappear when it is installed correctly. 3. Screw mounting bolts and adjuster screws together and then place into mounting holes in each corner of gate.
- Page 6 Pencil Wall Cup Marks Mounting Bolt Head 4. Place the gate in opening and ensure the bottom rail is completely flat on the floor and the wall cups are directly above each other. Then mark the position of each wall cup, stick the cups in position using the adhesive pads.
- Page 7 OPERATION To Open Gate 1. Using one hand, place thumb on the button and grip gate with fingers. 2. Slide button and lift gate, then open gate in either direction. When released, gate will swing closed. Always check gate is properly closed. NOTE: IF GATE IS OPEN AND EXCESSIVE PRESSURE IS APPLIED, (SUCH AS STANDING OR SWINGING ON GATE) STRUCTURAL DAMAGE MAY OCCUR.
- Page 8 Keycode : 42584155 MADE IN CHINA ©KMART AUSTRALIA LIMITED ANKO,KIDS&CO. & BABY SOLUTIONS® ARE TRADEMARKS OF KMART AUSTRALIA LIMITED. THEY ARE USED IN NEW ZEALAND BY COLES GROUP NEW ZEALAND HOLDINGS LIMITED TRADING AS KMART IN NEW ZEALAND. KMART AUSTRALIA - 690 SPRINGVALE RD, MULGRAVE, VIC 3170 AUSTRALIA.
Need help?
Do you have a question about the 42584155 and is the answer not in the manual?
Questions and answers