Summary of Contents for anko Tall & Wide Metal Gate
Page 1
Tall & Wide Metal Gate • gate with no extensions fits: 71.5cm - 79cm • gate with 1 x 12.7cm extension fits: 84.5cm - 92cm • gate with 1 x 25.4cm extension fits: 96.5cm - 104cm • gate with 1 x 12.7cm and 1 x 25.4cm extension fits: 109.5cm - 117cm Instruction Manual IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE.
Page 2
WARNINGS WARNING To prevent serious injury or death, securely install gate or enclosure and use according to manufacturer’s instructions. WARNING Never leave child unattended when using this product. WARNING Incorrect installation can be dangerous. WARNING Do not use the safety barrier if any components are damaged, missing or disassembled.
Page 3
WARNINGS WARNING Ensure the product to be installed is horizontal and flat on the floor. WARNING This product is intended for use with children from 6 to 24 months or small to medium pets. WARNING Regularly check that the safety barrier is properly installed and secure.
Page 4
42-584-155_KMART_ANKO_Metal_Gate Tall_Wide IM V2.indd 4 42-584-155_KMART_ANKO_Metal_Gate Tall_Wide IM V2.indd 4 19/1/2023 9:49 am 19/1/2023 9:49 am...
Page 5
42-584-155_KMART_ANKO_Metal_Gate Tall_Wide IM V2.indd 5 42-584-155_KMART_ANKO_Metal_Gate Tall_Wide IM V2.indd 5 19/1/2023 9:49 am 19/1/2023 9:49 am...
Page 6
Gate must be installed in a structurally sound opening. Ensure mounting surface (wall, door frame, stair etc.) is strong, rigid and has an even surface. If using gate on a stairway, it must be placed on the lowest step. EXTENSIONS 1.
Page 7
42-584-155_KMART_ANKO_Metal_Gate Tall_Wide IM V2.indd 7 42-584-155_KMART_ANKO_Metal_Gate Tall_Wide IM V2.indd 7 19/1/2023 9:49 am 19/1/2023 9:49 am...
Page 8
Stick the Mounting Cups in position with the Adhesive Pads and then place gate into position. For added security, fix each cup to the wall using a small Phillips head screwdriver (not included) and the Screws provided. 42-584-155_KMART_ANKO_Metal_Gate Tall_Wide IM V2.indd 8 42-584-155_KMART_ANKO_Metal_Gate Tall_Wide IM V2.indd 8 19/1/2023 9:49 am 19/1/2023 9:49 am...
Page 9
Align gate with Mounting Cups and tighten Adjuster Screws by turning clockwise, starting with the bottom Adjuster Screws, then tighten the top screws. Tighten equally until there is only a 1.5mm gap in the locking mechanism. Regularly check tension of all mounting bolts and adjust if required.
Page 10
42-584-155_KMART_ANKO_Metal_Gate Tall_Wide IM V2.indd 10 42-584-155_KMART_ANKO_Metal_Gate Tall_Wide IM V2.indd 10 19/1/2023 9:49 am 19/1/2023 9:49 am...
Page 11
To enable stay open feature, completely open gate to a 42-584-155_KMART_ANKO_Metal_Gate Tall_Wide IM V2.indd 11 42-584-155_KMART_ANKO_Metal_Gate Tall_Wide IM V2.indd 11 19/1/2023 9:50 am 19/1/2023 9:50 am...
Page 12
42-584-155_KMART_ANKO_Metal_Gate Tall_Wide IM V2.indd 12 42-584-155_KMART_ANKO_Metal_Gate Tall_Wide IM V2.indd 12 19/1/2023 9:50 am 19/1/2023 9:50 am...
Need help?
Do you have a question about the Tall & Wide Metal Gate and is the answer not in the manual?
Questions and answers