Table of Contents
Advertisement
Quick Links
Dongguan Hinen New Energy Technology Co., Ltd
Add: No.�� Dongkang Road, Dalingshan Town,
Dongguan City, Guangdong, China
Tel: +�� (���) �������� ext ����
Email: service@hinen.com
Website: https://www.hinen.com
Hinen Australia Pty. Ltd.
Add: Suite ���,Level �, Tenancy �,��� Mount Street, North Sydney
Email: service@hinen.com.au
Tel: +�� � ���� ����
Website: https://au.hinen.com
Europe
HL Hinen B.V.
Add: John M. Keynesplein �, ����EP Amsterdam
Email: service@hinen.com
Tel: +�� (���) �������� ext ����
Website: https://eu.hinen.com
Hinen Energy Eastern Europe
Add: Wąska 95, 05-806 Sokołów Poland
Email: biuro@hinen.com
Tel: +48 606 807 712
Website: https://eu.hinen.com
Hinen South Africa (Pty) Ltd
Add:Ground floor, Block B, ��� West Street,
Sandton.Johannesburg ����, South Africa
Email: SAfrica@hinen.com
Tel: +�� �� ��� ����
Website: https://za.hinen.com
Hinen Technology East Africa LIMITED
Add: No. �, Kirichwa Lane Court, next to
GreenhouseMall, Ngong Road, Nairobi, Kenya
Email: EAfrica@hinen.com
Tel: +������������
Website: https://za.hinen.com
Hinen West Africa LIMITED
Add:��A Opebi Rd, IKEJA, Ikeja ������, Lagos, Nigeria
Email: WAfrica@hinen.com
Tel: +�� (���) �������� ext ����
Website: https://za.hinen.com
OFF-GRID INVERTER
N����S / N����S / N����S
User Manual
Advertisement
Table of Contents
Related Manuals for Hinen N2400S
Summary of Contents for Hinen N2400S
- Page 1 OFF-GRID INVERTER N����S / N����S / N����S Dongguan Hinen New Energy Technology Co., Ltd Add: No.�� Dongkang Road, Dalingshan Town, Dongguan City, Guangdong, China Tel: +�� (���) �������� ext ���� Email: service@hinen.com Website: https://www.hinen.com Hinen Australia Pty. Ltd. Add: Suite ���,Level �, Tenancy �,��� Mount Street, North Sydney Email: service@hinen.com.au...
-
Page 2: Table Of Contents
Contents �. About this manual �.� Applicability � �. About this manual This manual applies to the following equipment: � �.� Applicability N����S � N����S �.� Scope N����S �.� Object � � �.� Safety instructions �.� Scope � �. Introduction This manual describes the assembly, installation, operation and troubleshooting of this equipment. -
Page 3: Introduction
�. Introduction �.� Product overview This is a multi-function inverter/charger that combines inverter, solar charger and battery charger functions to provide uninterruptible power support in a portable size. Its comprehensive LCD display provides user-con- figurable and easy-to-access push-button operations, such as battery charging current AC/solar charger priority, and acceptable input voltages depending on the application. -
Page 4: Installation
�. Installation �.� Installation tools �.� Unpacking and inspection Recommended installation tools include but are not limited to the following tools. If necessary, additional auxiliary tools can be used on site. �.�mm Blue tube Protection Goggle Anti-noise Earplugs Dust Mask Safety Gloves �.�mm Red tube terminals x�... -
Page 5: Preparation
�.� Preparation Tighten the two expansion screws to install the unit. Hole diameter: �mm Before connecting all wires, remove the bottom cover by removing the two screws as shown below. Hole depth: ��mm Expansion Screw ���mm Combination x� �.� Battery connection �.�... -
Page 6: Ac Input/Output Connection
Follow the steps below to make AC input/output connections: �. Insert the ring terminals of the battery cables flat into the battery connectors of the inverter and make sure the bolts are tightened to a torque of �-� Nm. Ensure that the polarity of the battery and the �.Always turn on the DC protector or circuit breaker before making AC input/output connections. -
Page 7: Pv Connection
CAUTION: IMPORTANT Be sure to connect the AC wires with the correct polarity. If the L and N wires are connected reversely, it Note: Lift up the duct paper may cause a short circuit in the grid when these inverters are operated in parallel. and then tighten the screws CAUTION: Appliances such as air conditioners take at least �~�... -
Page 8: Communication Connection
�. Operation Final Assembly After all the wires are connected, put the buttom cover in place and tighten the screws as shown in the picture. �.� Battery On/Off Once the device is properly installed and the battery is well connected, simply press the on/off switch (at the bottom) to turn the device on. -
Page 9: Function Keys
Function keys Battery Information Function keys Description Displays battery level �-��%, ��-��%, ��-��% and ��-���% in battery mode Exit setting mode. and charging status in AC mode. Go to previous selection. In AC mode, the battery charging status will be displayed. DOWN Go to next selection. -
Page 10: Lcd Settings
Mode operation information Program Description Available options Indicates that the device is connected to a power source. If selected, the acceptable AC input voltage range is ��-���VAC. Indicates that the device is connected to a PV panel. If selected, the acceptable AC input voltage range is ���-���VAC. - Page 11 Program Description Available options Program Description Available options If this inverter/charger is in Online, Standby or Fault mode, and the Default setting: ��.�V Output source priority selection is UTI, the charger source can be programmed as follows: Constant voltage �� charging voltage (C.V Solar power will be prioritized for charging voltage)
- Page 12 After pressing the "ESC" button for � seconds, the device will enter reset mode. Press "Up" and "DOWN" to Program Description Available options select a program. Then press the "ESC" button to exit. If selected, when the machine is in off-grid working state, the solar input (Default) power will be automatically adjusted...
-
Page 13: Fault Reference Code
�. Warning indicators �. Fault reference code Fault Codes Fault events Icon on Fault Codes Fault events Icon on �� Over temperature �� Fan is locked �� Battery voltage is too high �� The PV temperature is too High �� Battery voltage is too low ��... -
Page 14: Operation Status Description
�. Operation status description Fault Codes Fault events Icon on �� Charge Over Current Running status Description LCD Display PV Open Battery equalization The PV energy is charging the battery Grid loaded/charging status and the utility power Battery is not connected is supplying the AC PV Close loads. -
Page 15: Display Settings
�. Specifications Display Settings Press the “UP” or “DOWN” button to switch the LCD display information in sequence. The selectable information order is switched as below: battery voltage, battery current, inverter voltage, inverter current, grid voltage, grid current, load (watt), load (VA), grid frequency, inverter frequency, PV voltage, PV charging power, PV charging Inverter Model N����S / N����S / N����S output voltage, PV charging current. -
Page 16: Inverter Mode
Inverter Mode Utility Charging Mode Rated Output Power ����W/����W/����W Charging Current Nominal Input Voltage ��/��A±�% Output Voltage Waveform Pure Sine Wave AGM / Gel/LEAD/Battery ��.�Vdc Floating charging voltage Output Voltage Regulation ���Vac±�% Flooded Battery ��.�Vdc Output Frequency ��Hz or ��Hz Bulk charging voltage(C.V voltage) AGM / Gel/LEAD/Battery ��.�Vdc... -
Page 17: General Specification
�. Troubleshooting Voltage Problem LCD/LED/Buzzer Explanation/Possible Cause Solution The device The LCD/LED and automatically �. Recharge the battery. Charging algorithm for Lithium battery Battery voltage is too low. buzzer will activate for shuts down �. Replace the battery. � seconds and then （<�.��V/Cell）... - Page 18 Appendix: Approximate backup schedule Problem LCD/LED/Buzzer Explanation/Possible Cause Solution Backup time @ ��Vdc ���Ah(min) Model Load(W) Backup time @ ��Vdc ���Ah(min) Output abnormality. (Inverter �. Reduce connected load. ��� ��� ���� Fault code ��/�� voltage is lower than ���Vac or �.
Need help?
Do you have a question about the N2400S and is the answer not in the manual?
Questions and answers