Chevrolet TRACKER 1999 Owner's Manual page 109

Second Printing for Chevrolet Tracker Owner's Manual – 1999
Removing and Installing Your
Rear Window
The rear window of your vehicle is removable. This
allows you to open the back opening all the way or to
replace the window if it becomes deteriorated. To
remove the rear window:
1. Open the rear gate all the way.
2. Unfasten the canvas flaps at the lower corners of the
rear window to uncover the zipper pull.
3. Unzip the rear window.
JE–12–0023–X
4. Hang the rear window down so it hangs outside of
the vehicle.
5. Pull the rear window frame bar rearward (see
illustration above). Then slide the bar to the left to
remove the window.
Reverse the steps to install the rear window. Make sure
R
that all the Velcro strips and flaps are correctly
fastened and overlapped. Make sure that the window is
completely closed before driving.
yellowblue
2-51