Checking Your Restraint Systems.~,,~,,~~~~~*~~~,,,.-~I; Replacing Safety Belts After A Crash - Chevrolet SUBURBAN 1993 Owner's Manual

and just for the seat iir ydur
vehicle thar you
choose.
Don't let
someone else
use it, and use it only for the seat it is made to fit. To wear it, just attach it
to the regular safety belt.
Checking Your Restraint Systems
Now and then, make sure all your belts, buckles, latch plates, retractors,
anchorages and reminder systems are working properly. Look for any loose
parts or damage. If you see anything that might keep a restraint system from
doing its job, have it repaired.
Replacing Safety Belts After a Crash
If you've had a crash, do you need new belts?
After a very minor collision, nothing may be necessary. But if the belts were.
stretched, as they would be if worn during a more severe crash, then you
need new belts.
If you ever see a label on a right front safety belt that says to replace the
belt, be sure to do so. Then it will be there to help protect you in an
accident. You would see this label on the belt near the door opening.
AM177001
If
belts are cut or damaged, replace them. Collision damage also may mean
you will have to have safety belt parts like the retractor replaced or
anchorage locations repaired-even
if
the belt wasn't being used at the time
of the collision.