Safety Belts: They're For Everyone - Chevrolet SUBURBAN 1993 Owner's Manual

Table of Contents

Advertisement

To put the seat back in,
hold it sideways and put it into the vehicle. Turn the
seat to the forward position and set it down, with the latches at the bottom of
the seat over the hooks
in the floor. Pull up on the center release handle
and let the seat drop into place. Release the handle to let the seat latch
close and make sure
it locks into place. Then, move the seatback release
lever at the right rear
of the seat toward the center
of the vehicle and raise
the seatback.
After returning the seat back
to the upright position, push
the seatback
fonvard to make sure
it
is locked in place.
Then, return the outside passenger position safety belts
to the seat frame
buckles.
A
A safety belt that is twisted or not
properly
attached won't provide
I
1
the protection needed
in a
crash. The person wearing the belt could
be seriously injured. After installing the seat, always check to be
sure
that the safety belts are not twisted and are properly attached.
Safety Belts: They're For Everyone
This part of the manual tells you
how to use safety belts properly. It also tells
you some things you should not
do with safety belts.
Don't let anyone ride where they can't wear
a safety belt properly.
If
you are in a crash and you're not wearing
a safety belt, your injuries
can be much worse. You can hit things inside the vehicle or be
. - . >
ejected from it. You can be seriously injured
or killed. In the same
y%
,
&:
crash, you might not be
if you are buckled up. Always fasten your
ik::
safety belt, and check that your passengers' belts are fastened
properly too.
1-1
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Suburban and blazer 19931993 blazer

Table of Contents