Chevrolet SUBURBAN 1993 Owner's Manual page 306

5. Put the new bulb into the socket, gently press in on the bulb and turn it
clockwise until
it is
tight.
6. Put the socket back into the light assembly and turn it clockwise until it
locks.
7. Put the parkinghurn signal light assembly back into the vehicle and
tighten the screws.
Side Marker Bulb
P
1 Remove the screws and pull out the parkinglturo signal
light assembly.
2. Reach through the opening and turn the side marker bulb socket
3. Pull the bulb straight out of the socket.
counterclockwise and remove it.
4. Put a new bulb into the socket and push it in until
it is tight.
5. Put the socket back into the side marker assembly and turn it clockwise
to tighten it.
6. Replace the parkinglturn signal light assembly and tighten
the
screws.
6-41