Chevrolet EXPRESS - 2011 Manual page 350

4. When the tire has been lowered,
pull the tire toward you so you
can reach the tire retainer and
pull it up through the wheel
opening.
If you have a vehicle which
was completed from a cab and
chassis, refer to the information
from body supplier/installer.
The spare tire is a full size tire,
like the other tires on the
vehicle.
5. Put the spare tire near the
flat tire.
If the vehicle has plastic wheel nut
caps, loosen them by turning the
wheel wrench counterclockwise.
The wheel nut caps are designed
to remain with the center cap.
Remove the center cap.
If the wheel has a smooth center
piece, place the chisel end of the
wheel wrench in the slot on the
wheel and gently pry it out.
1. Do a safety check before
proceeding. See
for more
information.
2. Loosen all the wheel nuts with
the wheel wrench. Do not
remove them yet.
3. Assemble the jack and tools:
Assemble the
jack (A) together with the jack
handle (B), one or two jack
handle extensions (D) and the
wheel wrench (E).
Assemble the jack (A)
together with the jack handle (B),
two jack handle extensions (D),
and the wheel wrench (E).