Engine Oil - Chevrolet EXPRESS - 2011 Manual

Hide thumbs Also See for EXPRESS - 2011:
Table of Contents

Advertisement

For diesel engine vehicles, see
Engine Oil in the Duramax Diesel
Supplement.
To ensure proper engine
performance and long life, careful
attention must be paid to engine oil.
Following these simple, but
important steps will help protect
your investment:
Always use engine oil approved
to the proper specification and of
the proper viscosity grade. See
Selecting the Right Engine Oil
in this section.
Check the engine oil level
regularly and maintain the
proper oil level. See Checking
Engine Oil and When to Add
Engine Oil in this section.
Change the engine oil at the
appropriate time. See
Always dispose of engine oil
properly. See What to Do With
Used Oil in this section.
It is a good idea to check the
engine oil level at each fuel fill. In
order to get an accurate reading,
the vehicle must be on level ground.
The engine oil dipstick handle is a
yellow loop. See
for the location of the
engine oil dipstick.
Obtaining an accurate oil level
reading is essential:
1. If the engine has been running
recently, turn off the engine and
allow several minutes for the oil
to drain back into the oil pan.
Checking the oil level too soon
after engine shut off will not
provide an accurate oil level
reading.
2. Pull out the dipstick and clean it
with a paper towel or cloth, then
push it back in all the way.
.
Remove it again, keeping the
tip down, and check the level.
If the oil is below the cross-hatched
area at the tip of the dipstick, add
1 L (1 qt) of the recommended oil
and then recheck the level. See
Selecting the Right Engine Oil in
this section for an explanation of
what kind of oil to use. For engine
oil crankcase capacity, see
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents