Chevrolet 2006 HHR Owner's Manual page 54

2. If the child restraint manufacturer recommends that
the top tether be attached, attach and tighten the
top tether to the top tether anchor, if equipped.
Refer to the child restraint instructions and
the following steps:
2.1. For vehicles with rear seats, find the storage
compartments behind the rear seats.
2.2. Lift the lid of the storage compartments to
access the top tether anchors.
2.3. For vehicles without rear seats, find the top
tether anchor.
2.4. Route, attach, and tighten the top tether
according to your child restraint instructions
and the following instructions:
1-48
If the position you are
using does not have a
head restraint and you
are using a single tether,
route the tether over
the seatback.
head restraint. See Head Restraints on page 1-7 for
additional information.
3. Push and pull the child restraint in different
directions to be sure it is secure.
If the position you are
using does not have a
head restraint and you are
using a dual tether,
route the tether over the
seatback.
If the position you are using
has a fixed or adjustable
head restraint and you are
using a single tether, raise
or remove the head
restraint, route the tether in
between the head restraint
posts, and reinstall the
If the position you are
using has a fixed or
adjustable head restraint
and you are using a
dual tether, route the tether
around the head restraint.