Edition Notes The Maverick Storm 2 Profile M User Manual includes a description, safety precautions, installation, programming, operation and maintenance instructions for the Maverick Storm 2 Profile M as of the release date of this edition. Trademarks Chauvet, Chauvet Professional, the Chauvet logo, Maverick, and Maverick Storm are registered trademarks or trademarks of Chauvet &...
• The product has XLR sockets for DMX input and output. • Notice: This control circuit is isolated and belongs to the Class 2 data port. The control circuit has a cumulative leakage current of less than 3.5 mA. Maverick Storm 2 Profile M User Manual Rev. 3...
• In the event of a serious operating problem, stop using immediately. If a Chauvet product requires service, contact Chauvet Technical Support. Maverick Storm 2 Profile M User Manual Rev. 3...
LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is 40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit the overall intensity. Maverick Storm 2 Profile M User Manual Rev. 3...
Battery backup display with auto-rotate depending on fixture orientation Product Overview Name LCD display Menu buttons Carry handle (x2) DMX in/out USB port Power in Fuse holder Condensation valve WDMX Antenna Maverick Storm 2 Profile M User Manual Rev. 3...
10.12 in 9.92 in 257 mm 252 mm 18.62 in 473 mm 27.52 in 699 mm 14.43 in 366.6 mm 4.7 in 119.4 mm 15.28 in 10.26 in 388 mm 260.7 mm Maverick Storm 2 Profile M User Manual Rev. 3...
3. Setup AC Power The Maverick Storm 2 Profile M has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity. Procedure The Maverick Storm 2 Profile M comes with 2 Omega brackets to which the user can directly attach mounting clamps (sold separately). Make sure the clamps are capable of supporting the weight of this product.
DMX controller, download the DMX Primer from the Chauvet website: www.chauvetprofessional.com. DMX Linking The Maverick Storm 2 Profile M can link to a DMX controller using a 5-pin DMX connection or a WDMX connection. For more information about DMX, read the DMX primer at: https://www.chauvetprofessional.com/wp-content/uploads/2016/06/DMX_Primer.pdf.
<RIGHT> Navigates rightwards through the menu list Battery Powered Display The Maverick Storm 2 Profile M has a battery powered display that enables access to the menu when the product is powered off. Press and hold <MENU> until the display activates (approximately 15 seconds).
Operation Menu Map Refer to the Maverick Storm 2 Profile M product page on www.chauvetprofessional.com for the latest software and menu map. Main Level Programming Levels Description Address 001–512 Sets the starting address Dmx Mode 32 CH Selects the 32-channel mode...
Page 15
Auto test all functions Pan Fine Tilt Tilt Fine P/T Speed Dimmer Test Manually control and test all settings Manual Test Dimmer Fine 0–255 through the control panel Shutter Virtual Shaking Cyan Magenta Yellow Maverick Storm 2 Profile M User Manual Rev. 3...
Page 16
_FAN_ _ _ _ (x9) Speed _ _ _ _ Shows speed of each fan in rpm Information Base Fan1–2 Speed _ _ _ _ Error _ _ _ _ _ Shows any errors, or No Error! Information Maverick Storm 2 Profile M User Manual Rev. 3...
Page 17
Blade4- 1 Fine Blade4- 2 Blade4- 2 Fine Blade Rotate Blade. Rota Fine Focus Fine Focus Focus Auto Zoom Zoom Fine Prism Prism Rotate Iris Frost CMY Macro CMY Macro Speed Control Maverick Storm 2 Profile M User Manual Rev. 3...
Use control configurations to operate the product with a DMX controller. Control Mode The Maverick Storm 2 Profile M works with wired DMX or WDMX. To select which protocol to use: 1. Go to the Settings main level. 2. Select the Control Mode option.
104 111 Gobo 2 shaking, slow to fast 112 119 Gobo 1 shaking, slow to fast 120 127 Open 128 191 Gobo scroll, slow to fast 192 255 Reverse gobo scroll, slow to fast Maverick Storm 2 Profile M User Manual Rev. 3...
Page 20
000 255 Fine control (16-bit) Blade rotation 000 255 0–100% – Fine blade rotation 000 255 Fine control (16-bit) Focus 000 255 0–100% – Fine focus 000 255 Fine control (16-bit) Maverick Storm 2 Profile M User Manual Rev. 3...
Page 21
000 003 No function 004 006 Full CTO – CMY macro 007 009 1/4 CTO 010 255 CMY macro – CMY macro speed 000 255 Fast to slow Maverick Storm 2 Profile M User Manual Rev. 3...
Page 22
231 235 Pan/tilt swap on 236 240 Pan/tilt swap off 241 245 Min Zoom Focus off 246 250 Min Zoom Focus on 251 255 No function Maverick Storm 2 Profile M User Manual Rev. 3...
This Way Orbital Fast Moves Dirty Dirt Laser Rays Box Cutter Limbo Crazy Turns Fractured Mycelium Hex Chem Scribble Aperture Gobo Dimensions for Gobo Wheel 1 25.5 mm 18 mm IMAGE Maverick Storm 2 Profile M User Manual Rev. 3...
This provides a layer of protection against the high temperature from the lamp. • All custom gobos in the Maverick Storm 2 Profile M gobo wheel must be aluminum or glass. Procedure Follow the recommended procedure below to remove or replace the gobos: 1.
1. Go to the Settings main level. 2. Select the Backlight Timer option. 3. Select the length of the backlight timer, from 30S (30 seconds), 1M (1 minute), 5M (5 minutes), or ON (always on). Maverick Storm 2 Profile M User Manual Rev. 3...
1. Connect the Maverick Storm 2 Profile M products to receive the Presets by a DMX daisy chain. 2. Make the Maverick Storm 2 Profile M with the Presets to transfer the first in the DMX daisy chain. 3. Power on all of the products.
3. Select NO (to cancel) or YES (to reset the product configuration). Test Mode Auto Test To have the Maverick Storm 2 Profile M automatically test all functions one after the other: 1. Go to the Test main level. 2. Select the Auto Test option.
MAGENTA, YELLOW, CTO, BLADE1-1, BLADE1-2, BLADE2-1, BLADE2-2, BLADE3-1, BLADE3-2, BLADE4-1, BLADE4-2, BLADE ROTATE, DIMMER1, DIMMER2, MAC4, MAC5, MAC6, RDM ID4, RDM ID5, or RDM ID6. 4. Adjust the “zero” position for the selected function from 000–255. Maverick Storm 2 Profile M User Manual Rev. 3...
Check the magnetic rod upside down Sensor board is damaged Replace the gobo2 sensor board The magnetic rod of the gobo2 sensor Gobo2 board is dropped or installed upside Check the magnetic rod down Maverick Storm 2 Profile M User Manual Rev. 3...
Page 30
Check the magnetic rod down Sensor board is damaged Replace the zoom sensor board The magnetic rod of the zoom sensor Zoom board is dropped or installed upside Check the magnetic rod down Maverick Storm 2 Profile M User Manual Rev. 3...
8. Reinstall the gobos in the gobo holder. Make sure the gobos are in the correct positions. 9. Reinstall the gobo holder in the unit. Maverick Storm 2 Profile M User Manual Rev. 3...
Allen Key screws next to heat pipes on the back 25.5 22.1 Allen Key screws head covers 25.5 22.1 Vacuum Test Measurements Use the IP Tester from Chauvet Professional to ensure the product has been reassembled correctly by following the information below: Parameters Values Method Positive Test pressure...
DMX IP65 cable 32 or 48 Ordering Product Name Item Name Item Code UPC Number Maverick Storm 2 Profile M MAVERICKSTORM2PROFILEM 08012246 781462225940 UL 1573 CSA C22.2 No. 166 E113093 Maverick Storm 2 Profile M User Manual Rev. 3...
For warranty terms and conditions and return information, please visit our website. For customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration. For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-registration. Maverick Storm 2 Profile M User Manual Rev. 3...
Need help?
Do you have a question about the MAVERICK STORM 2 PROFILE M and is the answer not in the manual?
Questions and answers