Chapter II. Software Setup
B
efore installing the scanner software, make sure that the scanner is properly
connected as described in Chapter I. Installing the Plustek OpticPro Scanner.
Software Installation Requirements
Your
scanner
PicturePublisher), OCR software (TextBridge), the scanner's driver, Scanner Utility
and Action Manager 32 software. All of these software applications use approximately
160 megabytes of hard disk space after they are installed into your computer. To
ensure ample room for the installation, as well as for scanning and saving images, a
minimum of 260 megabytes of hard disk space is recommended.
Software Installation
The installation program called SETUP.EXE on the installation CD-ROM must
be run from within Microsoft Windows. Once Windows is running on your system,
please follow the steps below to properly install the software:
1. Insert the installation CD-ROM into its disk drive.
2. The auto-run sequence will begin.
3. Follow the on-screen instructions carefully to properly install the scanner's
software into your computer.
Software Setup Troubleshooting
Carefully review the steps outlined in this guide and the Quick Installation Guide
that accompanied your scanner. If you still need support, you may contact us through
one of the three methods listed on the last page of this guide.
Installing Additional Software
Your scanner is TWAIN compliant and functions with virtually all available
TWAIN compliant software. When purchasing new software that will use the scanner,
please make sure that it conforms to the TWAIN standard.
comes
with
the
6
image-editing
software
(Micrografx'