Software Setup Troubleshooting; Installing Additional Software - Plustek OpticBook 4800 User Manual

Table of Contents

Advertisement

7. Click the Scan button.
8. If an image appears on your screen, your scanner is working properly.
Information

Software Setup Troubleshooting

Carefully review the steps outlined in this guide and the Quick Guide that
accompanied your scanner.
If you are still having problems, please check that:
You have 800MB of free space on your hard disk drive.
The scanner is plugged in and has power.
You are using the USB cable supplied with the scanner.
The square end of the USB cable is plugged into the rear of the scanner.
The rectangular end of the USB cable is plugged into the back of your
computer.
If you deviated from the installation procedures defined in this manual, please
unplug the USB cable from the scanner and reinstall the software from the CD-ROM.
To reinstall your scanner's software, click Start, Run, then type D:\Install (where D
represents the letter of your CD-ROM drive). Carefully follow all the installation
instructions presented in the Setup Wizard. Reboot your computer when prompted,
and plug the USB cable back into the scanner while your computer is still turned on.

Installing Additional Software

Your scanner is TWAIN compliant and functions with virtually all available TWAIN
compatible software. If you purchase additional software to be used with your scanner,
please make sure that it conforms to the TWAIN standard.
Please refer to ImageFolio on-line help for further
information about using ImageFolio.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents